Want this question answered?
A lever works by reducing the amount of force needed to move an object or lift a load. A lever does this by increasing the distance through which the force acts . Lever neither increases or decreases the amount of total effort necessary . Instead , they make the work easier and simpler.
The total force is the vector sum of the individual forces.
Net Force
Acceleration= total force / mass. Total force might be applied force minus frictional force, or applied force minus air resistance etc.
Net force is the total force acting on a body You can also use "the total net force on the piano was about 45 N". Both of these sentences work.
A lever works by reducing the amount of force needed to move an object or lift a load. A lever does this by increasing the distance through which the force acts . Lever neither increases or decreases the amount of total effort necessary . Instead , they make the work easier and simpler.
You need to know the length of the lever and the location of the fulcrum along that length. The ratio of the lengths on either side of the fulcrum will determine the ratio of forces at either end. The length of the lever will dictate the total force possible. For a lever of length L divided into lengths a and (L - a) by the fulcrum (where a is the length of the lever between the fulcrum and the object you want to apply force to), the mechanical advantage will beM.A = (L-a)/aThe longer the lever, the bigger you can make the numerator of that fraction while keeping a unchanged.
The torque will be reduced. The torque is found by the cross product of the distance from the fulcrum and the applied force. Assuming the force is applied perpendicular to the lever, you merely multiply the two. So if the force applied remains constant and you shorten the distance to the fulcrum, you are reducing one of the values while the other remains constant. When multiplied, this will reduce the total. Therefore the torque will be reduced. In effect, the lever will have a weaker action.
net force
"Crank" by Ellen Hopkins has a total of 537 pages.
The total force is the vector sum of the individual forces.
Net Force
Acceleration= total force / mass. Total force might be applied force minus frictional force, or applied force minus air resistance etc.
Absolutely. four of the most basic machines do exactly that. A lever increases the force you exert by how close the fulcrum is to the object being move, and how far the applied force is away from the fulcrum. A screw transfers rotational force (torque) to a lifting force, and increases that force based on the pitch of the threads. A wedge increases lifting force based upon the pitch of the wedge from horizontal. A pulley, when using more than one, will increase the applied force, on an order of magnitude equal to the number of pulleys used. **Note: the total work applied equals the total work transmitted less friction. The force applied times the acceleration equals the work, the machines reduce the acceleration to increase the force transmitted.
Net force is the total force acting on a body You can also use "the total net force on the piano was about 45 N". Both of these sentences work.
Total Force Fitness
basically it means total becaus it can be a balanced force