If you connect the circuit properly the bulb should light up. That means attaching the left side of the battery to the right side of the bulb using a wire and attaching the right side of the battery to the left side of the bulb. If you do that the your bulb should turn on. If it doesn't then try changing the battery or the bulb.
Anything with a voltage power source, connecting wire and a load is an electric circuit. Hence if you have a flashlight you have an electric circuit.
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
Taking the wire off will make a difference. Putting a rubber band on afterwards will make no difference.
An electric current through a resistive circuit can be increased by decreasing the resistive load or increasing the voltage of the circuit.
Generally we use electric switches to put on or off the light,fan,computer,music system,etc.An electric switch is a device that is used to open or close an electric circuit.when we open an electric circuit the flow of electric current inthe circuit stops and when we close an electric circuit an electric current flows through it.
A Ground Fault Circuit Interrupter (GFCI) protects you from electric shock by quickly shutting off power to the circuit when it detects a ground fault or abnormal current flow. This can happen when there is a short circuit, a malfunctioning appliance, or contact with water.
If you are not talking literally about cutting a socket and are referring about the sockets circuit, then all that needs to happen is, a switch needs to be cut into the circuit.
I guess Electric Circuit....
What components make up an eletrical circuit
The object that uses electricity in a circuit to make something happen is known as the load. Usually the load is rated in watts.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
Voltage causes current to flow in an electric circuit.