In my idea,it will not boil!!thats all!!
it vapourise from the test tube
Heating should be slow.The test tube should not be full.Work in a laboratory hood.
The most important aspect of heating liquids in a test tube is to never look directly into the mouth of the test tube, as liquid may spurt out and come into contact with your eyes or face. However, if you are wearing plastic safety glasses, the substance may not harm you, depending on the type of substance you are heating.
creates pressure
- the test tube may break- the liquid can be spread outside
This is a small test tube or a watch glass.
Consistent temperature can be achieved by heating a test tube while moving the test tube all around the flame. Do not let only one part of the test tube rest on a flame but instead, keep moving the test tube slowly.
Evaporated liquid from the solution (transformed in gas) or gases released by thermal decomposition and condensed in the cooler part of the test tube.
It depends on what you are doing, you should be sure to follow instructions carefully and be sure to take proper safety precautions
Before heating it, you should check the test tube for damage (scratches or cracks), and not use one that isn't perfect. You should also wear safety glasses (to protect your eyes in case the test tube explodes, which happens sometimes, even when heating water). If you are heating something that could react violently, you should use a blast shield (thick piece of clear plastic).
Provided that you use the wider kind of tube known as a boiling tube, this is not so. Of course it is dangerous to heat liquids in a narrow tube, as this can cause rapid boiling and the shooting of the liquid out of the tube.
You should never point the open end of the test tube when heating liquids toward yourself or others for your own safety. Liquids inside the test tube when heating may release some gases and might affect someone when you point the open end of the test tube to them. when heating the test tubes, position it diagonally and move it slowly sidewards so we can prevent cracking or breaking of the test tubes if directly positioned on fire.