Last resort, if the oil and tar won't come off with regular cleaning brush, you can use a pressure washer surface cleaner from bestcargurus along with your pressure washer, that will surely do the job.
To effectively clean oil off your concrete driveway, you can try using a degreaser or a mixture of baking soda and dish soap. Apply the cleaning solution to the oil stain, scrub with a brush, and then rinse with water. Repeat the process if necessary until the oil stain is removed.
Onto your driveway.
Raise the 1999 Corolla front end. Remove the oil plug, and drain the oil into a pan. Take the oil filter off, and replace it with a new one. Put the plug back in. Lower the vehicle, and fill the engine with fresh oil.
One way to remove oil stays off cement driveway is by pressure washing it. You however have to use the correct pressure washing attachment to avoid damage, so it is best to use a pressure washer surface cleaner from bestcargurus, not will it only remove the stain faster but it will also ensure that you wont damage your driveway
what can i do to take it off if it keeps on turning
Could be burning it at such a slow rate not showing smoke Could be leaking on hot part of engine and burning off How much is it consuming?
how do i fine the oil filler in a 2009 corolla and get a tool to take it off
what parts do i have to take off, to take off the oil pan on a 2003 chevy cavalier
oil
Take the oil cap off of engine and pour in oil.
take the filter off then unscrew the bolt at the oil filter housing
first take your oil pan off drain oil first then take your pulley off the one with all your belts take the plastic cover off take the timing belt off then take the pulley for the timing belt off and you should see five 10mm screws there take those off and the pump should come off put evrything back the way you took it off