Want this question answered?
The wire size you are looking for is #1 copper with an insulation factor of 90 degrees C. This wire is rated at 140 amp but with a voltage drop correction it will give you 100 amps at the load. The wire for transformer feeders at 125% is included in the sizing.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energizedIF YOU ARE NOT REALLY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
NYMHY : Multi Threaded flexible wireSee also:NYA : Single threaded hard wire 750/450 Volts NYAB : Single threaded hard wire 750/450 VoltsNYAF : Single threaded hard wire 500/300 VoltsNYY : Multi threaded flexible underwater wire with water repelant cover gel (cable washing is needed for connections) 1000/600 Volts
Fm 10-450-3
1900-2100 FPS, depending on load.
The standard dead load of an elevator is about 450 pounds. This translates to a kN value of around 0.75.
No.
Current is determined by the load. If your load device requires 450 mA, then it will draw that amount of current from the supply.
Group Size 49
The 2009 Ford F-450-Super-DUTY has a 6.4 L base engine size.
The 2015 Ford F-450-Super-DUTY has a 6.7 L base engine size.
The 2011 Ford F-450-Super-DUTY has a 6.7 L base engine size.
The 2012 Ford F-450-Super-DUTY has a 6.7 L base engine size.