answersLogoWhite

0

The standard dead load of an elevator is about 450 pounds. This translates to a kN value of around 0.75.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Civil Engineering

What is the difference between bearing capacity and bearing pressure?

bearing capacity is the capacity of soil or strata that can be able to sustain the load of superstructure in the unit of load per m2 either ton/m2 or KN/m2 bearing pressure is nothing but bearing capacity example when you apply 100 KN on a unit area, equal opposite pressure will rise from the soil. load / area = bearing capacity


A reinforced concrete column 200mm in diameter is designed to carry an axial compressive load of 300 kN Determine the required area of the reinforcing steel if the allowable stresses are 6 MPa?

600mm^2


How do you Convert distributed load to point load?

To convert a distributed load to a point load, you need to calculate the total load acting over the distributed area. This is done by multiplying the intensity of the distributed load by the area over which it is acting. Once you have the total load, you can then consider it as a point load acting at the centroid of the distributed area. This simplification allows for easier analysis and calculations in structural engineering and mechanics.


What class of concrete is stronger ST2 or ST4?

ST 4 concrete is the stronger out of the two. ST4 is equivalent of 16 kn at 28 day strength where as ST2 is only 8 kn at 28 day strength.


What is uniformly distributed loads?

UDL = Uniformly Distributed Load UDSWL = Uniformly Distributed Safe Working Load UDL describes the way in which a load or weight is spread across a shelf area. Imagine a fish tank exactly the same size as the shelf; as you fill it with water, it finds its' own level so the load transmitted to the shelf is uniformly distributed.

Related Questions

What is a kn load rating in pounds?

1 kN = 225 pounds


What dose meaning of 120 kn disc insulator?

A 120 kN disc insulator refers to the maximum load capacity that the insulator can withstand before breaking or failing. In this case, it can withstand a load of 120 kilonewtons before reaching its breaking point.


How do you convert kn to occupancy load?

To convert kilonewtons (kn) to occupancy load, you need to know the weight-bearing capacity of the floor. Occupancy load is typically measured in pounds per square foot or kilograms per square meter depending on the building code. Once you have the weight-bearing capacity of the floor, you can calculate the occupancy load by dividing the capacity by the force exerted by the kn.


How do you kn ow your chinchilla is dead?

When it's not breathing...


What does kn means in safe working load?

"kn" stands for kilonewtons and is a unit of force used to measure the safe working load of a material or structure. It indicates the maximum force that can be safely supported or carried by the equipment.


In an AASHTO HS25-44 truck loading what does the 44 signify?

Vehicular loads are typically based on the AASHTO H-25 or HS-25configuration, Figure 2-2, which represents a 25 ton (222 kN) semi-truck.Some specifiers use an H-20 or HS-20 load; the load distribution is thesame as an H-25 or HS-25, but the resulting load is about 20% lower.Similarly in railroad applications, the standard load is represented by theCooper E-80 configuration at 80,000 lbs/ft (1167 kN/m) of trackAASHTO H-25 Highway Load-The intensity of the vehicular load decreases as the depth increases,however, the area over which the force acts increases.Live LoadsVehicular loads are typically based on the AASHTO H-25 or HS-25 configuration, Figure 2-2, which represents a 25 ton (222 kN) semi-truck. Some specifiers use an H-20 or HS-20 load; the load distribution is the same as an H-25 or HS-25, but the resulting load is about 20% lower. Similarly in railroad applications, the standard load is represented by the Cooper E-80 configuration at 80,000 lbs/ft (1167 kN/m) of track. Figure 2-2 - AASHTO H-25 Highway Load


How do you convert kN.m2 to a udl in kN.m?

"kN.m is a unit of bending moment. kN/m is a unit of udl (uniformly distributed load) as far as i know, there isn't kN.m2 but there is kN/m2 kN/m2 is a unit of pressure acting on an area. Please check your question again." I think you have misunderstood the question. The asker can correct me if i'm wrong but I think they mean, for example, that if you have a uniformly distributed load over an floor area in kN/m2 and you have say a beam running across this floor that you would like to run an analysis on, what would be the value of the load in kN/m on the beam? would it simply be the same value in kN/m or would the conversion affect the value? I say this because I'd also like to know the answer :)


Convert 5.5kg to kn?

To convert kilograms (kg) to kilonewtons (kN), you need to multiply the value in kilograms by 9.81 (standard acceleration due to gravity). Thus, 5.5 kg is equivalent to 5.5 * 9.81 = 53.955 kN.


What is the difference between bearing capacity and bearing pressure?

bearing capacity is the capacity of soil or strata that can be able to sustain the load of superstructure in the unit of load per m2 either ton/m2 or KN/m2 bearing pressure is nothing but bearing capacity example when you apply 100 KN on a unit area, equal opposite pressure will rise from the soil. load / area = bearing capacity


KN into N?

why is kn reading as n


What is 3645N rounded to the nearest kN?

4 kN4 kN4 kN4 kN


Convert 37.5 ton to kN?

To convert from tons to kilonewtons (kN), you can use the conversion factor 1 ton = 9.807 kN. Therefore, 37.5 tons is equal to 37.5 * 9.807 = 367.8375 kN.