blocked opening or broken stem
Loose spindle
Nothing, it can not do that .
I think to answer that, I would have to look at your bathtub faucet. Sorry.
Please turn off that faucet!
Turn one of the handles...
Take the lamp faucet ring out of the package. Clean the faucet opening. Using pliers twist the lamp ring onto the opening of the faucet clockwise. Once it is tight, turn on the water. The light should be activated and the water will change colours. Turn the water off. This should turn the light off.
no, clockwise
If this faucet has a spray hose, turn on the faucet and open the spray hose.This will adjust the diverter in the kitchen faucet to the spray and pressureize the hose.This will allow the faucet to equilize and the sputter will stop if the spray diverter is working. It could be that the diverter part in the faucet is defective.
There are always two hoses connected to a faucet. Hot & cold will have their own valves & stainless lines. (1) to each side. It's an easy hook up. Just turn off both valves, connect new faucet the same way & turn them on again.
There was air in the line. When you turn off the water with the faucet running make sure you turn it back on with the faucet open. That will release any air caught in the lines. That faucet shut with one on a lower floor on and restoring water does not work. Fast and easy. 1. turn on affected faucet 2. shut off water 3. turn water back on 4. faucet should be running smoothly now
yes turn the water off and get someone to help you put in the water faucet
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.