your brake rotors are warped. You should repalce you brake pads and have the rotors resurfaced if possible, or replaced.
Add your answer:
Registered users can ask questions, leave comments, and earn points for submitting new answers.
Already have an account? Log in
Related Questions
Why does steering wheel vibrate when brakes are applied?
This is probably due to worn brake rotors on the brakes, if there is no vibration when driving then this will be the cause.
I had new brakes rotors and calipers and the brakes are squeling now.The garage said my brakes where to hard and they had metal in them they sanded them.Still squeling What could be the cause.?
first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating. first of all, the pads may be semi-metallic and have chunks of metal in them which may cause the squeal, change to a less metallic pad may help, also the backing of the pads should have an anti-squeal gel applied to them, when you apply the brakes, the pads will hyper vibrate and can cause a squeal. The gel will stop the vibrating.
Your car has a shimmy when you apply the brakes at hi speed?
The most likely cause is a warped rotor. It can also be other things so have you brakes and suspension inspected.
Why would your car vibrate after installing new brakes?
Were the rotors resurfaced or replaced, or just the pads? Warped rotors are the most common cause of vibration when braking
What would cause the front wheel to screech while driving but not when you apply the brakes?
Possibly bad wheel bearing.
What is a vibration clip on the brake system of the Lincoln ls 2002?
a metal clip that holds brake pads securely in the caliper so they do not vibrate and cause brakes to squeak
When you apply the brakes hard vehicle has a pool which is accompanied by a vibration what the cause of this condition be?
Check with a tire store and see if you need an alignment.
What would cause 2003 TB to vibrate while in park or stopped with brakes on?
Possibly a broken motor mount. If it runs good otherwise one cause can be a vacuum leak. The check engine light should be on if it is a vacuum leak.
What problems will a bad speed sensor cause on a 1999 Nissan Maxima?
What problems will a bad speed sensor cause on a 1999 Nissan Maxima
What would cause noise in the rear wheels of a 1990 maxima - drum brakes - when driving. My friend has a 1989 with the exact same noise?
it could be a bad wheel bearing.
Front wheels shudder when I apply brakes?
Front wheel shudder could come from worn tires, bad brakes, or worn front end components. Check all of these to find the cause of the shudder.
What would cause a 2003 maxima to shake when hitting the brakes?
A common reason is that the front rotors have warped. Go check out WikiAnswers on the topic of "warped brake rotors". Rotors should wear out smoothly in normal driving. Use of the brakes that generate lots of heat (hard braking, riding the brakes) will result in warped rotors.
Why do my brakes vibrate so bad when I stop on my 1997 Volvo 850?
Vibrating brakes are almost always a symptom of worn rotors. When the rotor wears down, or has grooves, the brake pad can no longer make a flush connection with the rotor. This will cause the caliper (which holds the brake pad) to move in and out as it tries to establish a flush connection with the rotor. The rapid movement of the caliper is what causes your brake pedal to vibrate.
Why does 2001 Chevy truck 2500 vibrates when apply brakes to stop?
Most common cause of that is the rotors are out of round are warped. REPLACE ROTORS.
What would cause the RPM to raise when you apply the brakes on a Saturn SL2?
vacaum leak or bad throttle position sensor. gm Jim
Can an exhaust leak cause a vehicle to vibrate?
No.
What does heat cause the particles in matter to do?
vibrate
What could cause one of your rear drum brakes to brake more sharply than the other one you already replaced the brake pistons and bleeded the system?
un equal adjustment of brakes will cause one brake to apply earlier and harder than other brake
Why if the handle of a tuning fork is held solidly against a table the sound emitted becomes louder?
That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.That would cause a forced vibration; the tuning fork will make the table vibrate, or part of it, and thus, there is more surface to make the air vibrate.
Why might cause a 2001 Toyota Tacoma to vibrate when the brakes are applied.?
More than likely you have a warped rotor(s). You need to determine if it's coming from the front or rear brakes or both. The suspect rotor(s) would need to be turned or replaced along with brake pads if needed.
On the 2002 Nissan Maxima what would cause the radiator fan to vibrate when it turns on?
I just had that same problem on my 02 Maxima SE. My radiator was shaking so hard, and my fan would vibrate so loud, that if you didn't look at my car, you'd think it was a motorcycle by the way it sounded. That was embarrassing. It sounded just awful! I bought a new radiator fan. It cost about $100 and $60 to service it. It works just fine now. It runs so quietly now! :oD
How do you adjust the drum brakes on a 95 stratus?
INITIAL ADJUSTMENT PROCEDURE Be sure parking brake lever is fully released. Fully apply the vehicles service brakes 2 to 3 times by depressing the brake pedal as far as possible. This will cause the automatic adjuster mechanism to correctly adjust the rear drum brakes. Apply and release the park brake lever one time after the service brakes have been correctly adjusted. This procedure has correctly adjusted the vehicle's rear service brakes.
What would cause the automatic door locks on a Dodge Caravan to continuously lock and unlock?
bad ground on chassis. do the lights seem dim when you apply the brakes?
Your f 150 vibrates when applying the breaks?
Disks out of round, worn or warped will cause the brakes to vibrate. You need to have the rotors ispected and machined,if there is enough thickness let on them. If this does not fix the problem, you need to install new rotrs.
Why wont my headlight work on a 92 Nissan Maxima?
There are a couple of things that can cause your 1992 Nissan Maxima headlights to stop working. A bad ground wire can cause the problem. A blown fuse can also cause the problem.
✔️
Ask questions, submit answers, leave comments
✔️
Earn points for using the site
✔️
Customize your profile
Already have an account? Log in
