ur car is building up a lot of carbon or blowby on the butterfly valve (throttle body) u need to press the gas a little in order to start it when it fails to crank BUT U NEED TO ONLY CRANK IT THAT WAY FOR EMERGENCYS UNTIL U CAN GET HOME AND CLEAN IT OUT that is very important
Timing, fuel filter & Check throttle body not sticking & get injectors cleaned professionaly. good luck.
thermostat is stuck With my car, it was Heater matrix clogged with radiator sealant. The workshop cleaned it and it's start working fine!
Have you removed the battery cables and cleaned the battery posts and cable connections? This is a frequent cause for the problem that you describe.
You need to get it cleaned out.
Perhaps it will have pain for awhile after it is healed.
The throttle body needs to be cleaned. For complete instructions visit out enthusiast forum at www.trailvoy.com
Sometimes it happens because of rotors. If they are old and have a lot of grooves on its surface it will cause the grinding noise. Also it might happen if brakes were not cleaned properly during the replacement.
what would cause all power windows to only work once in awhile and defroster to go out on a 1997 dodge intrepid
advocacy ...that one took me awhile
drop your oil pan and clean or change the oil pump screen and it should work...I had to do that and cleaned it with parts cleaner and now it works fine..they tend to clog after awhile.
I changed the EGR valve, PVC valve, now it has gotten worse. I also cleaned the throttle body.
Can take awhile cause firered wasn't meant for cloning.