Want this question answered?
An inverted image is formed in a pinhole camera because the light rays coming from the top and the bottom of the object intersect at the pinhole.
No.
image larger than object
The object- and image-points of a particular lens are described as conjugate. The object point, or the point at which the image is taken from, and the image point, the image itself, are able to be flipped perfectly, as if the object is placed where the image was, an image will appear where the object was.
Because the image is not real. The object is not really there, it's only virtual.
the image distance will appear the same
An inverted image is formed in a pinhole camera because the light rays coming from the top and the bottom of the object intersect at the pinhole.
If the object distance is decreased in a pin hole camera, the image size will increase. If the object is too close, the full image will not be formed and the screen will appear dark.
It will be bigger
Double image.
You can figure out why an image in a pinhole camera is upside down if you think about how the light travels to get to the image. Light from an object higher (or the top of the object) than the camera travels in a straight line down to the camera. It goes through the pinhole and continues heading down until it hits the back of the camera. This means that the image of something higher than the camera is now low in the image. The opposite is true for light from an object lower than the camera (or the bottom of the object): it travels to a point higher in the image. Still does answer my question, how did the image get upside down? answer was no concusive.
a pinhole camera has a very small aperture for the light to pass through. Thus the sharp focus distance is very great too. You will get a bigger image if you move your paper or whatever the image lands on, further away from the pinhole.it may not be as bright, though
Think in terms of ray tracing. Light travels in a straight line in a pinhole camerabecause there is no refracting or reflecting optical element to change the path of the rays of light. The bottom of the film is on the line passing through the pinhole and top of the object. Since all light must pass through the pinhole, that means the top of the object exposes the bottom of the film.
I think a pinhole camera is similar to the human eye because like the pinhole camera when it sees something it reflects the image but it is an inverted image. With the human eye the brain corrects it and turns it the right way up. The pinhole cameras image is not corrected because it does not have a lens.
No
No.
Think in terms of ray tracing. Light travels in a straight line in a pinhole camerabecause there is no refracting or reflecting optical element to change the path of the rays of light. The bottom of the film is on the line passing through the pinhole and top of the object. Since all light must pass through the pinhole, that means the top of the object exposes the bottom of the film.