The tension on the blades of the cord cap to the receptacle does not have enough pressure to make a good connection. Whenever a receptacle feels loose when you plug an appliance into it, change the receptacle out for a new one. This will prevent the condition you state from happening.
If you do it will burn the winding immediately and make the fan inoperable. So, No, don't plug in ANY 12VDC device into a 120 outlet.
Yes, I see no reason this couldn't be done. But first, make sure the current drawn by the heater is 80% or less than the rating of the circuit and outlet. As for connecting a cord to this heater, that, too, should be a simple matter. I would look for what we call a knock-out, which is a hole punched but not yet removed from the area where electrical connections are to be made. You will need to buy a NM cable connector large enough for the cable. If there is no knock-out or if it is not large enough for the connector you need, you can hole-saw a hole to the size you need. If there is not room to do this cleanly then you should contact a competent electrician for more specific advice.
if you burn copper sulphite
Home depot sells RF switches whereby if the fan is connected to the transmitter. It can be controlled by as far as 5 meters i believe In my SPA i have this device for safety. switch here get turn on there
Adjusting the controls of the heater itself is the only safe way to make a space heater hotter. Manipulation of the inner workings is a surefire way to start a fire or electrocute oneself.
No it will not. It will either be leaking or become clogged which will make the heater not produce any heat. it has nothing to do with fuel mileage.
If you do it will burn the winding immediately and make the fan inoperable. So, No, don't plug in ANY 12VDC device into a 120 outlet.
Portable heaters are safe to use in the manner written on the heaters instructions. Some portable heaters are meant for use outdoors only, so using those heaters indoors would not be safe. The other thing to consider with heater safety is do you have children who might accidentally touch the heater, if you do you need to make sure that your heater does not heat up enough to burn the child. Also, its important to make sure that your house's electrical system is properly grounded so that your portable heater, if it is electrical, does not short out.
no, becausev you would not be able to plug it into the outlet
No! Thermostat.
An electric wall heater can be placed anywhere. Make sure there is 2 feet of space in front of the heater to avoid fires. Place the heater where there is not much foot traffic so there won't be any danger of it being tipped over. Also if you have small childen consider putting it where they won't have access to it as it can burn them.
The year, make and model info would help but generally the heater blower motor resister is located close by the heater blower motor.
No. Oxygen is not part of Jupiter's make-up.
Not knowing what year, make and model you have, I would suspect the heater fan switch and or electrical plug to the switch is at fault.
No, a clogged heater core will not make it overheat. A leaking heater core will.
To make an outlet layout, you will need to capture all the essential details. Have all details of the outlet included in the sketch which will serve as the true representation of the final structure.
It think it would make your eyes burn, I would stick to drinking it.