if the kickstand is down, the safety switch will kill motor. or it may be defected.
Well, a track bike is a bike dedicated for use on a velodrome. It has a fixed gear, no brakes, often a steel drop bar and some other features. But with a but of determination you can stick a fixed gear rear wheel in any kind of bike. The wouldn't make it a track bike, but would make it a fixie. If you want to be hard core in your fixie riding, the "purest" is of course to ride a track bike in traffic too.
Your top gear or last gear you shift to. Depending on what make and model of your bike, either 4th or 5th on motocross bikes and for woods bikes it would be 5th or 6th.
The best footwear for running would be running shoes. Many brands make running shoes. Find good fitting running shoes. You can buy these at many locations.
a machine is anything that is used to make life easier. if you could bike a mile or walk a mile the bike would be easier and faster. so yes it is a machine
First you need to get the Mach Bike from the bike shop.Next you need to put the bike in the fastest gear and there you go.But make sure you do not lose speed.
Which gear the bike is in doesn't matter, the wheels will have to turn the same number of times anyhow. To find the answer, calculate the circumference of the wheel, (hint: circumference = diameter times pi) then divide with the distance.
A bore kit does not make a bike faster. It makes the engine more powerful if you want to go faster you must work on gear ratios and or sprocket sizes.
Make sure the sidestand is retracted.
A very basic way to look at it is this..... With 4.56 gears, the driveshaft will have to turn 4.56 times in order for your tires to make one full rotation. With 4.88 gears, your driveshaft will have to go around 4.88 times for your tires to make one full rotation. Basically, the higher the number, the more rotations the driveshaft will make. On a 10 speed bike, you would climb a steep hill in 1st gear.... lots of pedaling to get the rear tire to move- it would move slowly, but you would have lots of hill climbing power. 4.88 gears would be similar to 1st gear on a 10 speed bike.... 4.56 gears would be similar to 2nd gear....4.10 gears would be similar to 3rd gear....etc.
They connect a power plant to a running gear plant to make a machine propel.
That would be either too much gear oil in the system or you have a crack in the system somewhere where the oil is leaking out and running down onto the ground.
You don't NEED them. They just make pedaling much easier and more efficient.