Stop taking it and drink plenty of water, you should drink plenty of water anyways while taking it... That's whats creating for..water retention
GO TO YOUR LOCAL LIBRARY AND COPY MANUEL
Drain the water from the cooling system. Remove the water pump hoses. Remove the water pump retaining bolts. Remove the water pump gasket and clean the surface. Reverse the process to install the new water pump.
Its on the front of the engine by the water pump remove ur belt and disconnect the wire and remkbe the two 10 mm bolts and remove it
To replace the water pump on a 1993 Ford Explorer, disconnect the battery and loosen the belt tension pulley. Remove the belt on the water pump. Disconnect the radiator hose from the pump and remove the bolts holding the pump. Remove the old pump and gasket. Clean the surface of the water pump mount with a gasket cleaner. Insert gasket sealer, new gasket, and pump. Reconnect radiator hose, belt, and tighten tension pulley. Reconnect the battery. Refill radiator with antifreeze.
Clean water
cornflour and water
loosen the bolts on the water pump pull and take off the belt, then take off the pully. take the hoses off then remove the bolts from the water pump and pull it off
water
whats Californias major rivers and bodies of water
It is a fan with a clutch. You have to have clutch wrentches to remove it. The nut that holds it to the water pump is an 1 1/2 nut. You have to hold the water pump pulley from turning and loosen the nut by turning it counter clockwise (as you are looking at it).
The Pacific Ocean.