0
What else can I help you with?
Should wattage match fluorescent ballast?
Yes, it is important for the wattage of the fluorescent ballast to match the wattage of the fluorescent tube. Mismatched wattages can result in inefficient operation, reduced lifespan of the bulb, or even damage to the ballast. Always make sure to check and use the appropriate wattage for both the ballast and the tube.
What specs need to match on laptop power adapters to make them interchangeable?
Wattage, voltage, and connector.
Will a higher wattage hps bulb work in a ballast that came with a lower wattage bulb?
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
Should the brand of speakers you buy match the brand of the stereo you will be using them with?
Well mostly it depends on the peak wattage of your stereo, if you have a higher wattage stereo I would go with speakers that could handle your stereos watts or they will distort.
What year did serial numbers have to match a person name buying it?
Never.
Will a dc power cord from a Compaq V2000 work on a Compaq nc6220?
All power adapters have to match the Wattage, Voltage and Amps exactly. So you have to look on the adapter on both of the power adapters and see if they match. If you use a power adapter that has more power than is needed you will fry the motherboard so be carefull. The wattage, voltage and amps are on the adapter..
What must you match when purchasing a power supply?
The equipments power requirements, and the mains voltage. The output of the power supply must be able to deliver the correct voltage to the equipment, at the appropriate wattage. Additionally, it should be capable of operating on the supplied mains voltage and wattage.
Can you put a 28w 2D lamp into a 16w 2D fitting?
No, you cannot put a 28w 2D lamp into a 16w 2D fitting. The wattage of the lamp should not exceed the maximum wattage that the fitting is designed for, as it can lead to overheating and potential safety hazards. It is important to always match the wattage of the lamp to the specifications of the fitting to ensure proper functionality and safety.
What wattage halogen bulb will match a 100 watt incandescent?
Halogen bulbs are about 30% more efficient so a 70 watt halogen does the job.
Do apms have to match when buying a new laptop charger?
The part number needs to match the old charger. Even if if the watts, volts, and amps match; there is no garuantee that the polarity of the pins will be the same.
Should I buy matching sets of patio furniture or mix and match individual pieces?
Buying a matching sets are cheaper then buying individual pieces.
What will happen if the heat lamp is 250 w and the holder is 150 w?
Using a heat lamp with a higher wattage than the holder can handle can cause overheating, melting, or even a fire hazard. It is important to match the wattage of the bulb with the wattage rating of the holder to ensure safety and proper functioning.
