Want this question answered?
YOU cant do it!! :)
Calipers, of which there are many types, are used to measure thickness. The most common type is the Vernier Caliper.
(the metric unit) The average bacteria is only about a micrometer in length, so there may be thousands in a single drop of water. (the tool) He used a micrometer to measure the thickness of the circuit board.
microscopes are used to measure the length of microscopic objects Microscopic objects are those which cannot be seen by naked eyes..Unit used to measured is micrometer.1000000 micrometer=1 m.
The precision of any measurement comes from the equipment being used, instruments that can measure in smaller increments are more precise, as they can measure closer to the true value. For example if you used a ruler to measure the thickness of a wire, you may get a result of 2mm, but if you measure the same wire with a micrometer you may get a result of 1.8mm - the micrometer can measure in smaller increments, so the result is more precise.
A micrometer is used to measure very small distances.
A micrometer is used to measure very small distances.
It can measure micrometers which are really tiny
Micrometer to measure the accuracy of 0.01 mm. Caliper to measure with accuracy of 0.1 mm is used.
Yes. An inside micrometer or bore micrometer can be used for measuring the bore of a machined cylinder.
A digital micrometer is used to measure small distances in the engineering and manufacturing field. It can measure wires, shafts, spheres, bolts, blocks, and holes.
An imperial micrometer can measure to within 0.001in (1000th of an inch).
Put it between two jaw piece micrometer. Screw close movable jaw. And read on a micrometer ruler.
Inside micrometer
With a micrometer.
Micrometer, ruler, tape measure, it sort of depends on the thickness you are trying to measure, if it is the thickness of the Earth's crust, a beam, or a piece of paper...
The digital micrometer just like the analog micrometer is used to measure thicknesses, diameters, etc. The main difference is that it is easier for the user to read (as is true of most digital vs. analog things).