Want this question answered?
It sounds cool
hottest part of flame
Decide which flame to use. If the air hole on the Bunsen is open you will get a roaring flame a more gentle heat, close the air hole a Little flame will be quiet.
Because it produces a small open flame. A kitchen gas cooker does not have a flame that objects can be placed in. Secondly you can control the temperature of Bunsen Burner. Yellow slack flame is a cool flame Pale blue roaring flame is a much hotter flame. It was invented by the German Chemist , Robert Bunsen. Prior to which objects to be heated had to be put on an open fire, with no temperature control. The Bunsen Burner, whilst still used in the lab, has largely been superceeded by steam and electric mantles, where the temperature can be more closely controlled, together with the fact that mantles are safer pieces of lab. kit.
because you have the vents open on the bunsen burner the flame is getting more oxygen, making it hotter. Different flame types of Bunsen burner depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
It sounds cool
A Bunsen burner produces heat and creates a heat source when doing an experiment. It uses methane and there is two flames a safety flame-you can put your hand through it without burning your hand and a roaring flame-this flame is blue and it is what you use when you preform an experiment.
As a safety flame, keep it on this if the burner is not in use :)
its hotter than a yellow flame
The dominant color of a nonluminous flame on a Bunsen burner is blue. Whereas, the dominant color of a luminous flame on a Bunsen burner is orange.
hottest part of flame
we cn usE bunSen burner ..... so that we coUld leaRn it?!
you would use the safety flame when not heating anything because the blue flame is for heating because its hotter than yellow.
You open th Bunsen burner. Then you use a metal grabber to grab the copper metal and put it on top of the Bunsen burner's flame. Soon the cooper metal will be kindled.
Most things in chemistry.. Usually you would use a blue Bunsen flame (half open at the bottom) for heating almost everything. The yellow flame is only a safety flame, as you can't see a blue one all that well, and it's not used for heating because it produces soot
The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
Decide which flame to use. If the air hole on the Bunsen is open you will get a roaring flame a more gentle heat, close the air hole a Little flame will be quiet.