Want this question answered?
Electrons have a negative charge. For that reason, electrons will always flow in the opposite direction of the current, which flows from positive to negative. Electrons will therefore move from a negative terminal to a positive terminal when we look at the load on a cell. Within the cell, the electrons will flow from the positive terminal to the negative terminal.
By forcing electrodes through the positive terminal of the battery which becomes the anode in the recharge process of a battery
You should connect the negative cable to the negative. Your question sort of stopped. Connect to a negative what?
the positive side, the negative side is usually just a ground
Electrons are negatively charged particles. The reason the negative side of your D battery is negative is because that's where the free electrons are. The positive terminal is starved or has a deficit of electrons. The negatively charged electrons naturally want to fill the 'holes', in atoms lacking an electron on the positive side. Thus electron flow is from negative to positive. Conventional current flow assumes that current flows out of the positive terminal, through the circuit and into the negative terminal of the source. This was the convention chosen during the discovery of electricity. They were wrong!
The ELECTRONS flow from the negative to the positive terminal. But it is considered that the electric current flows from the positive to the negative terminal.
Electrodes... Positive (anode) and Negative (cathode) electrodes which are attached to the terminals. The electrodes provide the chemical energy which is converted to a flow of electrons. And the electrolyte, the electrolyte separates the electrodes but allows for the passages of electrons and ions for the electro-chemical reaction of the electrodes.
when it works it has copper sulfate solution inside the wet cell battery which takes the electrodes from the negative terminal (-) to the positive terminal (+).
Negative terminal is grounded to the vehicle. Because the system is a negative ground system. Electricity will not flow unless it has a path to ground.
first you have to have a new mom and eat a monkey
battery
electrodes.
The negative terminal of a battery has a - sign and positive terminal has a + sign.
Look for a + by the positive terminal and a - by the negative terminal, or red for positive, black for negative. Some batteries have the positive terminal protruding and the negative terminal flat. Or you can get a meter that will tell you which is which,
The negative terminal does not go to the starter on a negative ground system. The negative terminal goes to ground.
The negative terminal is called the anode
yes the negative terminal is the ground. also it is the black lead that goes to it