No, router is not necassary. All traffic will transfer data within the network.
That would depend on the router.
It depends on how many subnets you have and how many ports you router has. Usually each port in router is devoted to on subnet, you can do math for your situation.
It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.It must be an IP address in the same subnet. Other than that, the network designer has the flexibility to assign any IP address in the same subnet. Quite often, the first or last IP addresses in a subnet are used, so if a certain interface on this router has IP address 10.0.5.1, and the network mask is 255.255.255.0, I would strongly suspect that the other router has IP address 10.0.5.2 (10.0.5.0 can't be used for this subnet).For serial (point-to-point) connections, to save address space, quite often a subnet /30 is used (that is, a subnet mask of 255.255.255.252), in which case the other router has the only other usable IP address in the subnet. For example, if this router has IP address 10.0.8.26 and a subnet mask 255.255.255.252, the subnet has addresses in the range 10.0.8.24 - 10.0.8.27, but since the first and last addresses can't be used, the only option for a router or other machine on the other end is 10.0.8.25.
dotted decimal notation
a subnet is an identifiable separate part of an organizatios network.
binary ANDing
The function of a network router is to rout signals from one computer with another, while allowing multiple computers to be networked together as the same time.
Layer 3 addressing is hierarchical because it allows the division of networks into subnets. For example, one route entry can refer to a large general network and another can refer to a subnet of that same network. When forwarding a packet, the router will select the most specific route that it knows. However, if a specific subnet is not in the routing table but the larger network that holds the subnet is known, then the router will send it to the larger network, trusting that another router will find the subnet.
A router running a classless routing protocol (Such as OSPF) will send the subnet mask in its route updates to its neighboring routers.
I need the user name and password for Netgear router 192.168.1.1.pls help thanks
A router
172.17