Want this question answered?
Refrigerant enters the compressor inlet as a low pressure vapor. The compressor increases the pressure, and discharges it as a high pressure vapor.
No , a high temperature high pressure ( gas )
High pressure vapor.
Cycles refrigerant through the system and changes the state of the refrigerant from a low pressure vapor to a high pressure vapor.
high pressure vapor
When the compressor fails, the high vapor pressure refrigerant is no longer condensed. Without a phase change of the refrigerant is refrigerator will not cool.
Check the refrigerant pressure. There is a sensor that detects the pressure of the refrigerant. If the pressure is not high enough the compressor will never engage.
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side
Well, like the name implies, it compresses. It creates the pressure by which the refrigerant (and also the compressor oil) flows through the AC system. Refrigerant enters the compressor as a low pressure vapor, and is compressed into a high pressure vapor. In the process, this heats up the refrigerant, which is important as air conditioning works through a heat exchange. This high pressure vapor travels to the condenser, where the heat which has been absorbed by the refrigerant is exchanged rapidly to the ambient air through the fins in the condenser.
In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.