Want this question answered?
Cable Select or by the jumpers put on the hard drive
There are jumpers on the drives that differentiate the master from the slave. If the jumpers aren't set correctly, the BIOS will not recognize them. In addition, some IDE ribbon cables are also labled Drive 0 (or Master) and Drive 1 (or Slave). If the jumpers are set correct, but the drives are plugged into the ribbon cable incorrectly, the computer will not recognize the drives.
a cable.
The jumpers on each drive have been set to either Master or Slave, or the drive jumpers have been sent to Cable Select the bios will select the first connector as Master and second connector as Slave
Only one master is connected to single IDE cable
Only two drives can be supported on an IDE cable. One Master and one Slave.
a dog that has a remote control cable connected to it
Parents can use the Parental control device to block a channel on their cable television therefore control what their kids are watching whenever they are alone by themselves. This device is control by a PIN number that parents can set on their TV and or cable set up box.
The channel that NESN is on with Time Warner Cable will vary depending on location. You can access the channel guide on the remote control by pushing the guide button.
That would be called Ribbon Cable. It's generally used in connecting hardware, such as: CD Drives, Floppy Disc Drives, and Hard Drives. The best thing to do is search for 'PS3 Ribbon Cable' and then make sure the Ribbon Cable has the correct amount of slots at each connection of the Ribbon Cable.
An IDE Drive is not the same as a SATA drive, for starters. If you want your optical drive to be the master on an IDE channel you can jumper it to make it such. The second drive on the IDE channel must then be jumpered as a slave. If the optical drive is the only drive on the channel then it ought to be jumpered as the master. Alternatively, you may be able to set both drives to "Cable Select" and let the cable position determine the priority. This presumes that your ribbon cable is of a newer design and supports this option.
If it's not there, it's not there. Cable companies can put their signals on any channel they choose, and they chose not to have a channel two in your system. They may be using it for other things, like cable box control, dedicated communications for some other reason or a whole host of other possibilities.