0
What else can I help you with?
What is the population of Adaptec?
The population of Adaptec is 2,008.
What is the ticker symbol for Adaptec Inc?
The stock symbol for Adaptec Inc is ADPT and it trades on the NASDAQ.
Where can one purchase adaptec raid?
There are many places where one can purchase adaptec raid. A good place is the website "Amazon" or the website "eBay" to purchase adaptec raid online.
What is the product range offered by Adaptec?
Adaptec offers SAS and SATA RAID Adapters, Hot Bus Adapters, cables and accessories such as: SAS HD cables, Serial Attached SCSI cables, flash and battery modules.
Which amitabh bachchan starrer movie adaptec from gujarati play andhalo pato?
Aankhen
What are some of the best Sata Raid Controller brands?
Some of the best Sata Raid Controller brands include LSI, High Point, Areca, Adaptec, and Intel. These products can be bought online on New Egg and other electronics retailers.
Can't format scsi IBM drive 18 Gb you have formatted the scsi drive with built-in application in Adaptec scsi card but now it is dead the card can detect it but can't format it even fdisk?
== == I would recommend making sure that if you have your sczi controller's RAID enabled that you disable it in the BIOS and then run a format. I had 5 IBM drives exhibiting the same symptoms as yours(they were 73gb though). Once the controller was set to sczi(not RAID) I could format the disk in in the scziselect utility thingy :P Check your cable, (Inspect every inch for any damage) Try and swap with known good cable. Try disableing in the SCSI Bios (CRTL-A) Features for the drive. If Fdisk is finding it, but unable to format it, most likely it's dead. IF Fdisk is not finding it. Check the System CMOS F1, F2, DEL, or INS. And make sure that SCSI is enabled, (Some systems disable it on failure as a failsafe) ================ Fdisk and the Adaptec format utility do very different things, and it is reasonable that you can have the situation you describe. My guess is that the IBM disk is an OEM drive that had non-default mode page settings that required the disk to be formatted to something other than 512 bytes/sector; or that you got tired of waiting for the adaptec utility to finish and you recycled power before the Adaptec utility finished. You need to understand that fdisk and the adaptec utility do very different things, and fdisk requires disk to be configured a certain way for windows (or DOS) compatibility. Solution - run the adaptec utility again. If disk is in degraded mode (i.e., the format never finished, then the utility will fix this problem for you once it completes). If fdisk still does not recognize your disk, you need some software to check out mode page settings and look at the blocking and such to make sure disk is set to 512 bytes/sector. you can look at something like santool's smart disk monitor software or smartmon-ux to correct things; reformat, or whatever. http://www.santools.com/smartmonux.html has some info on it
What is a device driver type Patin couffin engine for 64 bit system?
Patin-Couffin is a software 'engine', implemented as a device driver for Microsoft Windows (using the filename pcouffin.sys), written by French company VSO Software. It provides a low-level access layer for CD/DVD devices. It is an alternative to Adaptec's ASPI and Elaborate Bytes's ElbyCDIO.
Is there a way to convert a 50 pin cable on an older HP Scanjet 5p scanner to fit a 25 pin port on a Dell laptop?
I believe there is an adapter you can buy that will allow the conversion, but I believe that scanner uses a SCSI port, not a lpt printer or parallel port. If that's the case, then you need to find yourself a PCMCIA SCSI Card for your laptop. Go to adaptec's website, there you will find everything you'll need and then some. Or checkout Dell's website, they should offer something.
What do you need to have to put a SCSI hard drive into a mac?
For any Mac since hte original iMac: 1. A SCSI hard drive. 2. A PCI SCSI controller 3. An available PCI port SCSI controllers from Adaptec should have Mac OS binaries available. For any Mac prior to the original iMac: 1. A SCSI hard drive. 2. If using a non-Apple drive, a third-party formatting utility, or a patched Apple one.
Why system with Windows 2000 server and Active Directory hangs or starts some malfunctioning?
The HP Netervers LXPro, LX, and LXe system will hang during Windows 2000 installation if you attempt to boot from the Windows 2000 CD and if any Adaptec SCSI controller (including the system's embedded SCSI controller) is configured as the first bootable device on the PCI bus. Furthermore, there must be an additional storage controller configured to boot in sequence after the Adaptec SCSI controller.The HP Netservers LH Pro, LD Pro, and LH II system will hang during Windows 2000 installation if you attempt to boot from the Windows 2000 CD and if any Adaptec SCSI controller (including the system's embedded SCSI controller) is configured as the first bootable device on the PCI bus, and it is connected only to a CD ROM drive. Furthermore, there must be an additional storage controller configured to boot in sequence after the Adaptec SCSI controller.NOTE: The boot order is: slot 1, slot 2, slot 3, slot 4, embedded SCSI A, embedded SCSI B, slot 5 and slot 6.On NetRAID only: Disable the boot priority on the embedded SCSI via ECU. The HP NetRAID adapter must be placed in slots 1, 2, 3 or 4.'''SOLUTION:Install Windows 2000 using Windows 2000 setup diskettes.Creating setup diskettesFour blank formatted diskettes are needed. Label them as listed below: * Windows 2000 setup boot * Windows 2000 setup disk #2 * Windows 2000 Setup disk #3 * Windows 2000 setup disk #4# Place the Windows 2000 CD on a system running Windows NT or Windows 95. # Open a command prompt and change to the d:\bootdisk directory (assuming that D: is your CD-ROM drive). # At the command prompt type: makebt a: (If using a DOS or Win 9X system) makebt32 a: (If using an NT system)# Follow the on-screen instructions provided by the utility.Starting the installation Windows 2000 using setup diskettes# Boot from the Windows 2000 setup boot diskette. # Follow the instructions displayed, replacing diskettes as necessary. # Install HP drivers when prompted.'''
When was Created By created?
Created By was created in 1993.
