0
What else can I help you with?
When was the fiber optic cable first introduced?
The fiber optic cable was first introduced to the public in 2000. You can find out more information of fiber optic and its history at en.wikipedia.org/wiki/Optical_fiber
How can I install fiber optic cable in my house?
To install fiber optic cable in your house, you will need to first determine the best route for the cable to follow, such as through walls or ceilings. Next, you will need to carefully run the cable along this route, making sure to avoid sharp bends or kinks. Finally, you will need to connect the fiber optic cable to a compatible modem or router to enable high-speed internet access.
How can I install fiber optic cable for home wiring?
To install fiber optic cable for home wiring, you will need to first plan the route for the cable, then carefully run the cable through walls, ceilings, or floors using appropriate tools. Next, terminate the cable ends with connectors and connect them to the appropriate devices. Finally, test the connections to ensure they are working properly.
What is the branching fiber that is the first part of the neuron to receive a nervous system impulse called?
The branching fiber that is the first part of the neuron to receive a nervous system impulse is called a dendrite. Dendrites receive signals from other neurons or sensory receptors and transmit these signals to the cell body of the neuron. They play a crucial role in receiving and integrating incoming information in the nervous system.
How can I ensure a successful installation of fiber optic cable in my home?
To ensure a successful installation of fiber optic cable in your home, you should first plan the layout and route of the cable, ensure proper equipment and tools are available, follow manufacturer's guidelines for installation, and test the connection thoroughly before use.
How does a fiber optic cable carry telephone conversations?
We're used to the idea of information travelling in different ways. When we speak into a landline telephone, a wire cable carries the sounds from our voice into a socket in the wall, where another cable takes it to the local telephone exchange. Cellphones work a different way: they send and receive information using invisible radio waves-a technology called wireless because it uses no cables. Fiber optics works a third way. It sends information coded in a beam of light down a glass or plastic pipe. It was originally developed for endoscopes in the 1950s to help doctors see inside the human body without having to cut it open first. In the 1960s, engineers found a way of using the same technology to transmit telephone calls at the speed of light (186,000 miles or 300,000 km per second).
What is the fiber cable?
You may know that fiber optic cabling is important to applications like the internet, telephone systems and cable TV, but have you ever wondered about how it actually works, or why it's so perfect for transmitting data? We at Cablesdotcom thought you might be curious, so read on to find out what exactly goes into making fiber optic cable, and just how much it's capable of. Fiber optic cabling is based on optical fibers, which are long, flexible, hair-width strands of ultra-pure glass. Optical fibers are formed when preform blanks - portions of specially manufactured glass - are heated to between 3000 and 4000 degrees and then drawn out at a rate of up to 66 feet per second. As optical fiber is pulled, it is constantly monitored by a laser micrometer, which ensures that its diameter is perfectly uniform from start to finish. In order for optical fibers to transmit data over long distances, they need to be highly reflective. On their way to being spooled, newly-pulled glass fibers pass through coating cups and ultraviolet ovens, which respectively apply and then cure the thin plastic buffer coating that creates a mirror effect within the fiber. The finished optical fiber is then extensively tested in a wide range of categories, including Tensile Strength, Refractive Index Profile, Fiber Geometry, Attenuation, Bandwidth, Chromatic Dispersion, Operating Temperature, Temperature Dependence of Attenuation, and Ability to Conduct Light Underwater. After testing has proven that the newly-manufactured optical fiber meets all standards, it is sold for use in fiber optic cabling. Depending on what type of application it will be used for and how much data it will need to transmit, fiber optic cable can be built around a single strand of optical fiber, or larger groupings of it. To assemble a complete fiber optic cable, the strand or cluster of optical fiber is placed at the core, to be surrounded by a loose tube of PVC, which leaves the fiber room to bend when being routed around corners and through conduit. In order for the finished cable to transmit data signals, it needs to be connected to the two other main components of a fiber-optic system. The first of these is the optical transmitter, a device which converts electrical and analog signals into either On-Off or Linear modulating light signals, then releases that data into the fiber optic cable. The cable then relays the data emitted by the optical transmitter to the optical receiver, which accepts the light signal and reformat the data into its original form. Fiber optic cabling has advantages over standard copper coaxial cables, in that it can transmit larger quantities of data with far less loss, is able to maintain signals over long distances, carries little risk of corrosion, and is virtually free from interference. To view a wide array of fiber optic cables and accessories that can take your telecommunications network to a whole new level, visit us at Cablesdotcom
What is some of the benefits of the Transatlantic Cable?
The advantage of the transatlantic cable was that it took less time to transmit messages. In 1866 a voyage across the Atlantic could take months, so sending letters and getting answers could take over months. the transatlantic cable could transmit 1 word every 10 min which was a great improvement in communication devices the first message sent with the transatlantic cable was from Queen Victoria to president James Buchanan and it took 16h30min to transmit a 99 word message.
Where can I find more information on high fiber foods?
The first website I went to was the MayoClinic. On this site there are lists of high fiber foods, the serving size and how much fiber is in it. There are also links that have more information on high fiber diets.
What is fiber-optic?
Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information. First developed in the 1970s, fiber-optic communication systems have revolutionized the telecommunications industry and have played a major role in the advent of the Information Age. Because of itsadvantages over electrical transmission, optical fibers have largely replaced copper wire communications in core networks in the developed world.The process of communicating using fiber-optics involves the following basic steps: Creating the optical signal involving the use of a transmitter, relaying the signal along the fiber, ensuring that the signal does not become too distorted or weak, receiving the optical signal, and converting it into an electrical signal.A Fiber Optic is a piece of plastic or glass with light going through it.A technology that uses glass or plastic to transmit data.this data can be a cable tv data,computer networking data or telephone data .
What is optic fiber?
Fiber-optic communication is a method of transmitting information from one place to another by sending pulses of light through an optical fiber. The light forms an electromagnetic carrier wave that is modulated to carry information. First developed in the 1970s, fiber-optic communication systems have revolutionized the telecommunications industry and have played a major role in the advent of the Information Age. Because of itsadvantages over electrical transmission, optical fibers have largely replaced copper wire communications in core networks in the developed world.The process of communicating using fiber-optics involves the following basic steps: Creating the optical signal involving the use of a transmitter, relaying the signal along the fiber, ensuring that the signal does not become too distorted or weak, receiving the optical signal, and converting it into an electrical signal.A Fiber Optic is a piece of plastic or glass with light going through it.A technology that uses glass or plastic to transmit data.this data can be a cable tv data,computer networking data or telephone data .
Who is the father fiber optics?
It wasn't a one man effort, inventing fiber optics. Works were inspired by John Tyndall who first discovered light can travel an irregular path through glass. Alexander Graham Bell later contributed. Heinrich Lamm in 1930 put the first fiber optic cable together stranding cable together and sending a signal across the wire. There were many other people who helped improve it over the year. Al Gore is not the father of Fiber Optic cables, in case you were wondering.
