a bottom is always a base.
a meniscus
it is probably called figure it out, it is curved because glass is sticky. When you measure the volume from a graduated cylinder, measure at the bottom of it. It is called the meniscus.
its called a meniscus
circles
Stroke
The base of a cylinder is called a circular base. It is a flat, circular surface that forms the top and bottom of the cylinder.
a cylinder has only two faces- the top and bottom sorry if this didnt help you
it is kinda like a cylinder except turn the cylinder sideways and then make the bottom flat.
Yes - those that are conventionally called the "top" and "bottom".
The "bottom of a curved line" made by the liquid in a graduated cylinder could be called the "measuring line" or "reference line" in the application of that piece of labratory equipment. The curved surface of the liquid itself is called the meniscus, and we look to the bottom of the meniscus to make our reading as to the volume of the liquid in the graduated cylinder. The liquid in the cylinder "grabs" the sides of the cylinder and "pulls itself up" just a bit, and that creates the curve in the surface of the liquid. And that curve, the meniscus (which is from the Greek word for crescent), leaves us with a problem: where do we "read" the volume marked off by the graduations along the side of the cylinder? And the answer is, "At the bottom of the meniscus."
Water in a glass graduated cylinder adheres to the sides of the cylinder, forming a meniscus which is an upward curve. When reading volume in a cylinder, look at the meniscus at eye level. Read the volume at the bottom of the curve.
In a word... No! if they are getting water in them, they have a leak.. Too much water, and Bye Bye Boat to the bottom of the lake!