Wiring bulbs in a series is useful in certain applications. For example decorated lighting on holiday trees using multiple bulbs on a single circuit. This is useful by keeping the circuit linear and simple and allows for a single switch. The disadvantages to having multiple bulbs on a linear circuit is that if one bad bulb turns off the whole circuit.
The effect of adding bulbs to a circuit that is connected in series is that it increases the load. As such, the bulbs will become dimmer with each addition since the bulbs share the current flowing through the circuit.
beacause copper is what is used in wires and when wiring series, less copper wire used which means cheaper. houses today usually have parallel circuits. trust me, i teach technology at a school.
CommentIf you teach technology, then you should know that there is absolutely no reason why connecting lamps in series, rather than in parallel, would necessarily require less copper. Furthermore, the disadvantages outweigh the advantages. If any lamp fails, then the entire circuit will fail. An empty lampholder will be subject to the full supply voltage and, so, present a shock hazard. All lamps must have identical power and voltage ratings.The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
A: In a series path anything added makes current to go down assuming the source remain the same
current will decrease
As you add more bulbs to a series circuit that means that the bulbs are in series to one another, therefore the total resistance is the sum of the individual resistance of the bulbs. If you add bulbs of the same resistance,then the rate at which the resistance changes will increase in a constant manner provided the current source is not altered. For instance if the bulb you are using is rated 20v,60w, then the current passing via the bulbs in series is the square of the voltage divided by the power in this case the current is approximately 7amperes.
For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.
The bulb is dim.Because,the voltage is drops in series connection so you add more bulbs in series the last bulb got low voltage that reason for the bulb is dim
ANSWER: The brightness of both bulbs will decrease. If the bulbs are identical the current will decrease to 0.2 Amps. This is a simple series resistive circuit, the more bulbs you add in series both the amperage and bulb brightness will continue to go down.
A: In a series path anything added makes current to go down assuming the source remain the same
Parallel circuit lights are built as so: ______light_______ |_____light_______| |_____battery_____| Series circuit lights are built like this: ___light___light___battery___ |________________________| In a parallel circuit, lights don't get dimmer when you add more, and if one breaks, the others still work. In a series circuit, when you add more, the lights get dimmer, and when one breaks, they all break. It is possible to have a combination of both in one circuit though.
current will decrease
As you add more bulbs to a series circuit that means that the bulbs are in series to one another, therefore the total resistance is the sum of the individual resistance of the bulbs. If you add bulbs of the same resistance,then the rate at which the resistance changes will increase in a constant manner provided the current source is not altered. For instance if the bulb you are using is rated 20v,60w, then the current passing via the bulbs in series is the square of the voltage divided by the power in this case the current is approximately 7amperes.
If you add more cells in series with the bulbs, the current will increase as the voltage across the bulbs increases. If you add more cells in parallel with the bulbs, the current will stay the same because the voltage of the cells does not increase when they are added in parallel.
A: There is no such a thing as simple circuit if the bulbs are put in series the light will dim if put in parallel both bulbs will light up the same provided the source can sustain the power increase
For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.For a series circuit such as this, simply add the resistances to get the equivalent resistance.
Voltage remains constant; current increases.
usually in series
Taking some bulbs out of the circuit!! (I think :P) Taking some bulbs out of the circuit!! (I think :P) Use Ohm's law I = E/R. Add some values and check it out. You use the formula V = IR (where V and E are the same thing, voltage. I is the current. R is the resistance). If you add more resistance then your current will be lower. I would suggest looking at parallel and series resistance so that you can understand equivalent resistance.