0
When you get a toner low message what can you do to extend the life of the toner cartridge before you replace the cartiridge?
Wiki User
∙ 12y ago
The life of a toner cartridge may be extended, in some cases, by taking it out and gently taping it to loosen the settled toner inside. However, many copiers include mechanisms to do this automatically, so doing it manually may not gain anything.
When printing, you can choose draft quality in Properties--it won't print as dark and you won't use as much toner. If you have color cartridges, you can opt for black rather than color and save the colors.
In addition, many toner cartridges are designed to operate for a specific number of copies and stop after that even though toner may remain in the cartridge. In that case, the cartridge life cannot be extended.
Wiki User
∙ 15y ago
Wiki User
∙ 12y agoEvery toner cartridge is different let alone how the printer reads the toner level.
The easy way, if you haven't done this already, is to look in the printer software and check the "Toner Save Mode" or something similar. Usually you can access it from the printer menu when printing or in the printer software on the printer itself. I might be in the advanced settings. The same way inkjets have the "save ink" settings in theirs.
The more involved way would be to take the toner cartridge out of the printer and shake it gently in a way that would make the toner inside more level. Yeah, your guess is as good as mine.
Be-aware that most printers still use the color inks/toners even when printing black and white pages unless you tell it specifically not to. Just make a "Preset" or whatever yours is called and save one for a "standard Color" page, "standard Black and White, "Photo color", etc, and it will make your individual color and black and white ink/toner cartridges last a lot longer. Well, those that have the separate color cartridges anyway.
Wiki User
∙ 12y agoRe-fill rather than replace ! You can re-fill most cartridges at least three times before you start to lose print quality. This is not only cheaper, but more environmentally friendly.
Add your answer:
Earn +20 pts
When you get a toner-low message what can you do to extend the life of the toner cartridge before you replace the cartiridge?
Many printers have a 'Toner Save' or 'Economy Mode' which uses less toner per print. Enabling this setting can prolong the life of the cartridge.
When you get a toner-low message what can you do to extend the life of the toner cartridge before your replace the cartridge?
Your page ink will be lighter and you have a lot more pages to go. Watch you should do is send the ink in to the manufacture and pay to get a refill. I is less expensive than the store.
How do you replace an ink cartridge for an Epson nx300 printer?
The answer is online which I've copied below -http://files.support.epson.com/htmldocs/nx300_/nx300_ug/wwhelp/wwhimpl/js/html/wwhelp.htmReplace Ink Cartridges : Remove and Install Cartridges---- Remove and Install CartridgesBe sure you have your replacement cartridges handy before you begin. You must install new cartridges immediately after removing the old ones.Caution:Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.1.Turn on the NX300 Series.2.If a cartridge is expended, you see a message on the NX300 Series display screen. The message on the screen indicates which color to replace. Press OK.If you're replacing a cartridge before it's expended, press the Copy/Fax button, press the Menu button, press or to select Maintenance, and press OK. Then select Change InkCartridge and press OK.3.Open the scanner.Caution:Do not lift up the scanner unit when the document cover is open.4.Open the cartridge cover.5.Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Dispose of it carefully. Do not take the used cartridge apart or try to refill it.Warning:If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children.6.Before opening the new cartridge package, shake it four or five times. (Do not shake a cartridge after opening the package; ink may leak.)7.Remove the cartridge from the package, but be careful not to touch the green chip on the cartridge.8.Remove the yellow tape from the bottom of the cartridge.Caution:Do not remove any other labels or seals, or ink will leak.9.Insert the new cartridge into the holder and push it down until it clicks into place.10.Once you replace all the necessary cartridges, close the cartridge cover and push it down until it clicks into place.11.Close the scanner.12.Press OK to begin charging the ink. This takes about 2 minutes.If you see an ink replacement message on the display screen, press OK and press down all the cartridges securely. When you see a completion message on the display screen, ink charging is finished.Caution:Never turn off the NX300 Series while ink is charging or you'll waste ink.If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and store it in the same environment as the NX300 Series with the label facing upward. Note that there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or surrounding area, and do not store the cartridge upside down.If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.Related Topics PopupPopupSee Also Popup
Learning About Canon 210 Ink Cartridge Replacement?
Has your Canon 210 ink cartridge run low? If so, it is time to replace it. You can normally tell when this is happening if the documents that you are printing keep coming out faded or in different colors. Color ink cartridges tend to run out of one color before the other.
Can you reset a hp ink cartridge after refilling it?
Can you reset a hp ink cartridge after refilling it? Can you reset a hp ink cartridge after refilling it? Until now, there isn't any (well known) way to do it. Your cartridge should work well without the reset just try to refill before the nevel of ink is too low cuz it can damaged the cartridge and you'll have to buy a new one. Good luck. Go to the following website and download the freeware InkMonitor 2.1.2: http://www.pokluda.cz/. You have to add data about new cartridge. HP60 cartridge information = 200 pages per cartridge. This works great for me. It gives you a history of everything printed. This way you can gauge when its time to refill your cartridges. You must refill before they run out of ink or you will burn out the print heads and have to replace them. The newer Hewlett Packard printers have included in the software that comes with their printers, a "toolbox" that includes a section called Estimated Ink Level. Its a great tool that allows you to keep track of how much ink is left in your cartridges so you don't start a big print job and get stranded out of ink in the middle of it. The only problem is that has become quite troublesome on those who wish to refill their cartridges. If you refill your cartridge or have someone else refill your cartridge, it will read as low or empty when you try to print with the cartridge. How does HP do it? They started embedding a serial number in the contact strip located on the back of the cartridge. The printer remembers that serial number and gives the message of low or out of ink. The internal memory is located in the printers firmware and is not in the software. It will remember the previous two cartridges ink level. We have posted various ways to reset the ink levels so your Estimated Ink Level will read full again. Click on your printer cartridge number below to find out how. http://www.inkjetsuperstore.com/hp-CC640WN-remanufactured-inkjet-cartridge
What is a mixer valve and how do you repair it?
Any faucet or control that mixes the hot and cold water before it comes out of the spout is a mixer valve. It is usually reserved for a shower control. They will vary in how to fix them. Some you replace rubber seals and gaskets, some you replace a cartridge. It is really no different than a kitchen faucet in the way it is put together. All of them you take the handle or handles off, then the trim plate and then you have access to the valve. Some are screwed in and some are held in with a clip that locks the cartridge in the body of the control. With the water turned off, taking it apart one step and layer at a time, laying out the pieces as they come off, it shouldn't be a problem fixing it. I believe this is true, if the valve screws in, it will probably have rubber seals that can be replaced. If the cartridge is held in with a clip, you replace the entire cartridge.
How do you remove oil filter on a 2006 Ford Fusion?
It uses a cartridge type filter. You can buy a wrench that will fit the cartridge, but a large channel lock wrench will accomplish the task, unless you over-tighten. Remember to remove the filter drain plug, before removing the filter. Be sure and replace the O ring on both the drain plug an the filter.
How can you tell if you need to replace your cartridge filter or if you can just clean it?
You can continue to clean the cartridge until it begins to have worn places, tiny holes or other obvious damage. If it gets to the point that the pores of the fabric are clogged it needs to be replaced. You should be able to monitor the pressure guage. There should be a noticeable difference before/after cleaning, if not it's too clogged.
How do you change oil filter inj 2.5 engine 2008 jetta?
Remove the sound baffle to gain access to the filter cover by removing eight(8) screws on each side of the barrier. Remove retaining line from bottom of plastic filter cover. Rotate the cover counterclockwise. Be sure to place a container under the cover to catch the oil that will leak as you rotate the cover. Remove the filter cartridge and the O-ring inside the cartridge cover. Lightly coat the new O-ring with oil before inserting it into the cover. Place the filter cartridge into the cover holder on the engine making sure the cartridge is fully inserted. Carefully replace the plastic cover and snugly hand tighten clockwise. Replace the retaining line to the bottom of the cover. Refill oil and run engine to check for leaks. Replace the sound baffle.
What are the steps to using an ink cartridge refill kit?
There aren't may steps involved in using an ink cartridge refill kit. One would need to remove the cartridge from the printer and inject the new ink into it before placing it back into the printer.
How should one maintain fridge water filters to avoid contamination?
One should change the fridge water filter cartridge at least every six months to avoid contamination. Fridge manufacturers create water filters that are easy to access and replace, but one should consult the user manual before attempting to replace it.
Researching the Brother Printer Cartridge?
You may want to research the Brother printer cartridge before you go and actually buy a printer that requires it. This can help you find out what kind of ink replacement cartridge costs you can expect to pay. You should also figure out an estimate of how long each printer cartridge will last based on how often you use your printer.
