Want this question answered?
=
The oil pressure light switch is located in the engine compartment on a 2002 Hyundai Santa Fe. It is to the right of the oil filter.
Ddefective or mis- adjusted brake light switch - located at the upper end of the brake pedal under dash area
How do you replace rear window brake light bulb in the 2004 Hyundai Santa Fe?Read more: How_do_you_replace_rear_window_brake_light_bulb_on_2004_Hyundai_Santa_f_e
You don't. If your Santa Fe only has the front map lights which don't come on when the doors open up there is a fix. Contact HMA and start a case with them. Hyundai has a service policy update which replaces the current map light(s) with ones that will come on along with the rear dome light and cargo area light when a door is opened up. It took my local Hyundai dealer a month of Sundays to get going and order the part/perform the work but it was well worth it.
The brake light on a Hyundai Santa Fe is replaced by removing the retaining screws, twisting the bulb, and unscrewing it from the wiring harness. A new bulb is then installed and the assembly put back in place.
No
Have you tried changing the bulbs first?
Front or rear, turn signal or reverse lights,dome light or dash? Most bulbs are stamped on them what they are. Most autoparts stores can tell you in about 2 minutes. good luck
See Hyundai Technical Service Bulletin #08-FL-007 dated July 2008.
Brake light switch, goto your Hyundai dealership, buy the part for $15 and install it
Lift the back door & you will see 2 screws securing the tail light assembly, take them out & gently wiggle the assembly to release the 2 rubber locating pins, & that will give you access to all the globes in the tail light assembly.