Both are same..
AnswerQuit MS-DOS (alt+F4) to get back to windows. Then go to Start -> Shutdown -> Restart in DOS mode. The computer will restart DOS but won't start windows. When you want to start windows again, just type win.ANSWER:
MS-DOS and DOS are the same program: MicroSoft Disk Operating System. If your computer is in DOS mode, type WIN to start up windows. However, if you are already in Windows, then you are actually in the DOS prompt (also called the command prompt) which is a simulated DOS environment run by Windows. In this case, just type EXIT to return to Windows. If you are trying to get your computer into DOS mode, and you have either Windows 95 or 98, go to Start --> Shutdown, and select the option that says "Restart in MS-DOS mode". If you have any version of windows after 95 or 98, then go to Start --> Run, and type in Command to get into the command prompt.
The main reason people have their computer in safe mode is due to unreliability of the computer in normal mode. If the computer is turning off in safe mode then the sooner it is with a Qualified Computer Technician the better
To turn off safe mode on a computer, first shut down the computer completely. Wait a few seconds, then turn the computer back on. Select "Start Normally" in the menu that pops up asking the operator to choose how to restart the computer.
start the computer in safe mode and roll back the driver
An x86 computer starts in real mode.
it depends on what PC you have. on apple and windows X.p professional, if the computer is not turned off properly of you had a power , your computer will/might come up a screen saying "your computer was not shut down properly and as a result data was lost. choose safe mode to return this data back or continue normally!" You can also access Safe Mode when you boot up Windows and press F8 repeatedly on the black screen. It'll give you the option to either access Safe Mode, or Safe Mode with Networking.
request mode,sample mode and event mode
To turn sleep mode off, or awake an computer, a person can usually touch any button or move the mouse. If it is stuck in sleep mode a person can remove the battery for a few seconds, replace it and turn the computer back on.
You changed resolution to a mode that your monitor cannot handle.Restart in Safe Mode; to do this (in Windows), restart the computer, and press F8 before you see the windows logo. You may need to press it several times.You should get a menu, and one of the choices is "Boot computer in safe mode". Boot in safe mode, then once your computer is booted, change the resolution to 640x480, then shut down and reboot again (returning to normal mode). You can then set the resolution and colors back to where you want them (and where they work).
You'd see a computer-to-computer network if the router is set to ad-hoc mode instead of infrastructure mode.
graphics mode , the system sets the mode to graphics from text mode
Idle mode is when your computer isn't doing anything.
Start the computer in 'Safe Mode'. Press the F8 key during boot up continuously until you get the option to start in safe mode.