They have coil packs so there is not a plug wire to follow, they are above the valve cover right beside the fuel injectors under the coil packs. The coil packs are round and black and the size of a silver dollar. Also you will have to take off the fuel rail to get to them.
2nd answer
The fuel rail does not have to be removed. Just remove the connector and the one bolt from the coil and remove coil from the plug well. The fuel rail is not in the way.
yesThis is a gasoline motor right? yes yes it is
That depends if you have a gasoline engine On a 2003 Ford F-250 if you have the 5.4 liter gasoline V8 engine it has ( 8 spark plugs ) If you have the 6.8 liter gasoline V10 engine it has ( 10 spark plugs ) If you have the 7.3 liter DIESEL engine it doesn't have any spark plugs
desiels dont have spark plugs they run off compresion
Where_is_locate_spark_plug_ford_2001_van_E-250
When the plugs are finger tight, tighten them with a ratchet 1/16 of a turn.
The spark plug gap on a 1987 Ford F-250 should be set between .042 and .050 inches. Platinum spark plugs may work best for this vehicle.
On a 2002 Ford E-250 cargo van, the spark plugs are located on the engine's cylinder heads. For the V8 engine, you'll find them under the ignition coils, which need to be removed to access the spark plugs. If your van has a V6 engine, the spark plugs will still be found on the cylinder heads but may be positioned differently depending on the specific engine configuration. Always refer to the vehicle's service manual for detailed instructions on accessing and replacing spark plugs.
pull the coil packs off and get a long socket, or a long extension
To change the spark plugs on a Ford E-250, first, ensure the engine is cool and disconnect the negative battery cable. Remove the ignition coils or spark plug wires, noting their order for reinstallation. Use a spark plug socket and ratchet to carefully remove the old spark plugs, and then insert the new plugs, ensuring they are properly gapped. Finally, reconnect the ignition coils or wires and the battery cable.
To change the spark plugs on a 1997 Ford E-250 van, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires, taking care to label them for correct reinstallation. Use a spark plug socket and ratchet to remove the old plugs, then install the new plugs, torquing them to the manufacturer's specifications. Finally, reconnect the ignition components and the battery terminal.
this depends on the spark plug you use. If you use autolite spark plugs you will need to gap them to 54 thousandths.
The spark plugs are under the 8 individual coils : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front