I have a 16 gauge finsh.nailer model number 69575 and have list front clip that holds nails in place
Using pneumatic or brad nails for staple gun to attach wood trim is the quickest and neatest method. In a single motion, the tool drives the nail and lowers the fastener's head below the surface. Cordless nail guns have the benefit of being the best mobile trim tool.
The Tradesman 8482C Crown Stapler/Brad Nailer is one of the most popular.
The brad nailer falls at the smaller end of this spectrum, designed to handle brads (small finish nails) that are useful for crafting projects and light trim carpentry work, such as nailing up decorative moldings or picture frame construction. A brad nailer is larger than a powered staple gun, but smaller than a finish nailer, and it handles 18-gauge brads between 5/8 and 2 inches long.
Brad nails for staple gun are at the smaller end of this spectrum, designed to handle small finish nails, which are useful for crafting projects and light trim carpentry work like nailing up decorative moldings or picture frames. An 18-gauge brad nailer is larger than a powered staple gun, but smaller than a finish nailer, and it handles brads between 5/8 and 2 inches long.
Brad nails for staple gun are at the smaller end of this spectrum, designed to handle small finish nails, which are useful for crafting projects and light trim carpentry work like nailing up decorative moldings or picture frames. An 18-gauge brad nailer is larger than a powered staple gun, but smaller than a finish nailer, and it handles brads between 5/8 and 2 inches long.
In today’s home shop equipment lineup, an air compressor has become a vital addition. Along with an air compressor you will be an assortment of air power tools. One family of air power tools are the very handy air driven nailers made in several different styles. Perhaps the two models that are of the most interest to the home shop user are the brad nailer and the finish nailer. Both of these nailers are used for light duty fastening jobs. Although they look very similar in construction, they use different fasteners and are used in slightly different applications. Finishing nailers use a heavier constructed fastener or finishing nails. Finishing nails usually are made in either 15 gage or 16 gage. They are available in lengths from one to four inches. The finishing nailer is typically used to assemble larger wood working projects, fasten baseboad around rooms, or fasten larger molding such as crown molding. The size of the finish nail makes the finish nailer very useful for any light fastening job around the house. Brad nailers use a smaller fastener also known as a wire brad. Wire brads are made 18 gauge only, and are more easily bent in use. On the other hand they do not make as big a hole in the wood and do not cause splitting problems. Wire brads are available in lengths from 5/8ths inch to 2 1/4 inches. Brad nailers are perfect for assembling craft projects and small woodworking projects where a larger fastener is not appropriate. They excel at holding wood parts together while the glue sets or applying light trim on plywood edges. Both of these tools will need an air compressor that can provide 70 to 100 PSI at a minimum of 3.5 CFM. This is well within the range of most small home shop air compressors. Since you will find either the brad nailer or finish nailer invaluable for home remodeling projects, you will also need enough air hose along with quick coupler fittings to complete your air nailer set up.
Brad nails for staple gun cost around 500-800 rupees in India. Staple guns, like crown staplers, can drive fasteners deep into wood to the depth of their two-pronged legs. A brad nailer, by contrast, uses a small, thin nail with almost no head—it's more like a pin. These kinds of nails fasten molding and trim to walls.
Brad nails for staple gun cost around 500-800 rupees in India. Staple guns, like crown staplers, can drive fasteners deep into wood to the depth of their two-pronged legs. A brad nailer, by contrast, uses a small, thin nail with almost no head—it's more like a pin. These kinds of nails fasten molding and trim to walls.
The larger hose will also have a greater volume and be able to supply a greater volume of air to the tool you are trying to run. A brad nailer doesn't need much air volume (cfm) but a framing nailer or air sander do. Also, larger hose has less pressure drop over a long distance.
There are hundreds of different staples available. Without knowing the model number, it's impossible to say which ones fit YOUR particular tool. Take it to any Sears tool dept. and they will sell you the staples.
East Central High School in Hurley, Mississippi (5 min. from mosspoint)
Would have repeated parts....this is the right answer