It's an easy fix, visit this website and look through their available parts, you will find what you're after and it's easy enough to install the parts yourself so you can save a bit of money while you're at it. http://www.autopartswarehouse.com/steering_rack~pop.html
You can find lots of information about Rack and Pinion steering on the Internet by going to the following website: http://auto.howstuffworks.com/steering2.htm
A rack end is the part of a steering system (rack-and-pinion-steering) that connects a steering rack to the tie rod (track rod/connecting rod) which connects to the wheel. In a simple steering system, there are four parts: steering rod - rack (this is the one that works with the pinion gear) - rack end - tie rod
In order to replace a rack and pinion on a Nissan 200SX, you will need to remove the front wheels, the steering coupler, the power steering lines, and various bolts. You will then be able to remove the rack and pinion. Place the new rack and pinion in place, and return the various parts.
It has a rack and pinion.
No, rack and pinion refers to the steering mechanism.
what does rack and pinion steering consist of and do on a 1995 Dodge Intrepid?
Steering wheel Steering shaft Pinion Rack Tie Rod Steering Arm
rack and pinion steering gives easier and more accurate control of the vechile improving handling and steering response
A Rack and pinion. Your steering wheel turns a gear(or pinion). This gear moves a shaft side to side(rack). The shaft is attached to the wheels allowing you to steer. If the componets are damaged or the internal power steering parts are damaged it needs replaced.
yes it has rack and pinion
All car have a rack and pinion steering
Rack and pinion, power box, and power rack steering.