0
What else can I help you with?
What is the best way to change your own brake pads?
The best way to chance your own brake pads would be to make sure you know that the problem is really the brake and then go to AutoZone and buy a new brake and follow the instructions in the manual
Brake lines diagram on 1997 Chrysler LHS?
The brake lines diagram for a 1997 Chrysler LHS typically illustrates the routing of the brake lines from the master cylinder to each wheel, including connections to the anti-lock braking system (ABS) if equipped. It shows the layout of the front and rear brake lines, highlighting key components like the brake proportioning valve and any junction blocks. For accurate details, it's best to consult a service manual specific to the 1997 Chrysler LHS or a repair guide, as these diagrams can vary based on the vehicle's specific configuration.
Will srt8 rims fit a Chrysler pacifica?
SRT8 rims are designed for specific Chrysler models, primarily performance vehicles like the Chrysler 300C SRT8. The fitment for a Chrysler Pacifica depends on several factors, including bolt pattern, offset, and brake clearance. Generally, SRT8 rims may not be compatible with the Pacifica without modifications, so it's essential to check these specifications before attempting to fit them. Always consult with a professional or refer to the vehicle's manual for the best guidance.
Why won't my bike brake release?
There could be several reasons why your bike brake won't release. It could be due to a problem with the brake cable, brake lever, brake pads, or the brake caliper itself. It's best to check each of these components to identify the issue and fix it accordingly.
What is the best place to go to get my brake lights installed?
I would say that Midas is the best place to go to. They will be able to install your brake lights with no problem. If you want to do it yourself, however you can go to Auto Zone and buy them.
What causes the abs light to come on in a Cadillac Escalade?
Problem with the Antilock Brake System, (ABS). The repair is best left to a professional.
How to replace brake light on 2003 Chrysler sebring?
2003 Chrysler Sebring brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
What is the best Chrysler?
I think its .........
What might be the problem if your brakes on your 2000 Silverado are trying to lock up on the passenger right front going down the highway?
Your brake caliper may be sticking and needs replacing. Another problem with older vehicles is that the inner liner on the flexible brakes lines will come loose and restrict the flow of brake fluid. This can make the brake pads slow to engage the rotor and also slow to release it. To fix this problem, replace the flexible brake line, and bleed the air out of the lines. It's best to replace both front brake lines at the same time since the same problem will happen to the other side before long.
How do you change a brake light on a 2010 Chrysler Sebring?
2010 Chrysler Segring brake light bulb lamp replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
What is a self-adjusting brake kit?
The self adjuster brake kit is replacement hardware for the adjuster for the brake shoes. If there is a problem with the adjuster it might allow the brakes to back off causing a brake failure. If you are changing this yourself be aware there is a left and right side, if these are mixed up or not installed correctly you will have a brake failure. Best to leave it to a qualified mechanic.
Why are my bike brakes squealing and how can I fix them?
Your bike brakes may be squealing due to dirt or debris on the brake pads or rims, misalignment of the brake pads, or worn brake pads. To fix this issue, you can try cleaning the brake pads and rims, adjusting the alignment of the brake pads, or replacing the brake pads if they are worn out. If the problem persists, it may be best to consult a professional bike mechanic for further assistance.
