You can purchase plastic (most likely vinyl) fence posts online from such websites as Buy Vinyl Fence, Buy Direct Vinyl Fence, Lowe's, Penn Fence and Home Depot.
The number of bags of concrete needed for setting fence posts depends on the size and number of posts. Typically, one 50-pound bag of concrete is enough for one 4x4 fence post. So, if you have 10 fence posts, you would need 10 bags of concrete.
There are many places where one can buy or rent a temporary fence. One can buy or rent a temporary fence at popular on the web sources such as Rent National and Rent Our Fence.
The posts are 25 feet apart, so with a 100-foot fence, the rancher will need 5 posts - one at each end and three in between.
To fence a 48 ft by 60 ft area, you first calculate the perimeter, which is 2(48 + 60) = 216 ft. If using standard fence sections of 8 ft each, you'll need 216 / 8 = 27 sections of fence. For fence posts, typically one post is needed at each end of a section plus an additional post for the start of the first section, resulting in 27 + 1 = 28 posts needed.
1432 divided by 4 equals 358, which is the number of 4-foot sections of fence. Since the fence must be terminated on both ends, add one more post to terminate the last section. Thus, the answer is 359 posts.
One way to modernize wooden fence posts is to paint them. There are plenty of how-to videos online featuring different paint techniques. You can also incoporate flower beds on your fence to give it a modern look.
yes they need to be set in concrete. depending on your fence, one bag of concrete per post should be enough.
Specifying the area inside the fence doesn't tell you the dimensions, and the length of fence needed to enclose it (the perimeter) depends on the shape. -- The minimum fence that can enclose 1 acre is 740 feet (73 fence posts), around a circle with a diameter of 236 feet. -- The minimum fence that can enclose 1 acre with straight sides is 834 feet (83 fence posts), around a square with 208.7-foot sides. -- If it has straight sides but it's rectangular (not square), then the bigger the difference is between the length and width, the more fence (and posts) you need. For example, if the pasture is 6-ft wide and 7,260-ft long, it's exactly one acre, the horses have to stand in single-file while they graze, and it takes 14,532 feet of fence (1,453 fence posts) to enclose it.
20 posts were used 20 posts were used
To set fence posts securely in the ground, dig a hole that is at least one-third the length of the post, fill the bottom with gravel for drainage, place the post in the hole, and fill it with concrete. Make sure the post is level and let the concrete set before attaching the fence panels.
6600 the correct answer is actually 6601 because you need one more post to close the fence.