Do you have a picture of location of crankshaft position sensor for 1992 Chevy Cavalier 2.2L ohv engine?
crankshaft position sensor location on 2004 mercedes e500
I'm not sure which engine you have, but, the 2.0 has the camshaft sensor on the drivers side of the engine, right in front of the distributer
Price this part at any GM dealer and have them print out the picture of this sensor which will show you it's location on the engine. That is a free service. Mark
89 toyota pickup v6 engine anti knock sensor location
location of engine cooling fan sensor
The 1991 Ford Explorer 4.0 engine does not use a cam sensor, but rather a crank sensor at the lower front of the engine to set crank or time position, two bolts and one connector.....
Price this part out at any GM dealer and ask them to print out a picture of the part which will show you the location of it on your engine. This is a free service. Mark
The 2.8 engine doesn't use a cam sensor.
I found a sketch of the crank shaft position sensor location in my factory service manual, but have no way to post it here. I can tell you that it is on the side of the engine block next to the firewall and below the exhaust manifold. It is close to the center of the block. The sensor is held in by one bolt. It is a bear to get to but it can be replaced with the engine in the car.
the temp sensor is on the driver side of the engine block next to the exhaust manifold.
on the front of the engine. it has a white wire on it and it screws in and out like a spark plug
near the #4 spark plug. 2.0L Engine
The temperature sensor for the coolant system is located on the front of the engine. The exact location of the coolant temperature sensor is dependent upon the year of the engine.
on the back side of the engine bewteen the 2-3 cylinder under the intake manifold. Google images shows a picture of the exact location if you look up "7afe knock sensor"
The Chevrolet Corsica 3.1 liter engine crank sensor can be found on the back of the engine. You will need to remove the rear engine cover in order to access the crank sensor.
The knock sensor is located on top of the engine block underneath the intake.
sensor is in the plastic reserve on the float.
location knock sensor 2002 pontiac grand prix gt 3.8 engine
sensor is found on front of engine block above the harmonic balance wheel
On intake manifold
TOP OF ENGINE JUST TO PASSENGER SIDE OF CENTRE. THE CAMSHAFT LOCATION SENSOR IS ALSO AT THE SAME LOCATION.
It should be located on the top of the thermostat housing just at the right hand end of the engine. I am assuming that you are looking for the guage sensor.
what is a etc sensor for a buick rendevous