Most auto parts store sell a replacement cable.
Wiki User
∙ 2010-02-24 04:10:59A universal hood release cable will work on the Ford Explorer if one is purchased that says it can be used on full size pickups and SUVs. The cable can be adjusted for length if that is necessary for the cable to fit properly.
You can still pull the cable. Reach under the dash you should be able to find it
From under car... its not too bad on a lift you can find cable near the hood need to get the inner wire and pull with pliers
You can find a hood release cable for a 1991 Geo Prism at various auto part stores. You can also check with local salvage yards.
Find were the cable connects behind your grill and pull that lever Find were the cable connects behind your grill and pull that lever
If you can find the cable under the hood, or if you can get to the cable where it's broken, a pair of vise-grips and a healthy pull should open it up.
The hood release cable.
How much cable came out when broke? Cut the plastic cable back to the point where you can see the steel cable core and pull with vice grips to open. You can pull the cable around to handle easier.If it broke under the hood try to find the cable and do the same.
The hood release handle is connected to a cable. The cable runs to the front of the hood and connects to a catch. When the cable is pulled the catch releases the hood.
Hood release cable has connector nuts on both ends of the cable. Loosen the connector nuts. Remove the cable retainers. The cable will come off and can be replaced with a new hood release cable.
go under the bumper and find the cable that runs to the hood and pull it realy hard
To open the hood on the 2000 Beetle if the hood release lever is broken inside the car, you can remove the glove compartment of the vehicle and find the release cable inside the dashboard. Pull the cable to open the hood. You will then need to replace the hood release lever.?æ