You can find an exhaust bracket for a 1996 Chervrolet Cavalier in Billings, Montana at your local Auto Yard. You can find great deals!
no the caliber are different.....
My 1997 Chevy Cavalier with 2.2L motor used a 15mm socket.
First you should pull the belt off of the pulleys and out of the engine bay. Next, remove the power steering mount without disconnecting it. Next, detach the alternator wires and remove the alternator bracket.
It is up by brake pedal bracket to the left of it take cover off at brake pedal bracket in the process of it right now.
the heater core is between the driver and passenger in the middle of the floorboard there should be a plastic cover with some screws then a bracket holdt the heater core in place,remove the hoses from under the car to complete removal,fairly simple to do!
It is on a bracket near the ash tray under the dash.
1988 chevy cavalier flasher take ash tray and bracket out look up and lift you can see it if not you can put your hand up in to lift and find it.
It is on a bracket under the dash and above the brake pedal.
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
The purge valve solenoid on your 2001 Chevy Cavalier is located on the side of the engine. It is mounted on the block right below the intake manifold and can be distinguished because of the bracket attached to it.
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt