It should be on the right rear axle tube on the front side of the axle tube.
1gnek13t63j210068
Open your drivers door and look at the information stickers , look for the axle code If you resubmit your question with the year of your F-150 and the axle code I'll try to look up the gear ratio - Helpfull
Get a heavier duty rearend. the tow capacity is based on the rearend. Chevy 10, 12, and 14 bolt rearend.
In 69 you could get whatever you wanted, a lot of impalas had the 12 bolt rearend and some had the 8.5 10 bolt rearend.
Do you mean gear ratio or rearend size?
what kind of rearend does a stock 96 ford bronco eddie bauer have.
Dana i believe
Rearend
take all the bolts out of the rearend pumpkin cover and you will see the rearend gears, push the axle inwards and you will see a C clip that holds it in place inside the rearend, pull the C clip out and then you can pull the axle out.
The brake is on the rearend. Depending on what year the mower is will tell you which side of the rearend it is on. More recent mower will have it on the right side of the mower. You should be able to look under the mower just in front of the right rear wheel and see the rod going from the linkage to the rearend. It goes through a lever on the rearend. There is a nut where that pivots. If you tighten that nut it will adjust the brake.
8.6
8.8