answersLogoWhite

0


Best Answer
Copy

THIS IS HOW TO FIX IT disconect battery Take the cover off the colum just behind the steering wheel then put key in the lock and turn it all the way on like you were tring to start it at the same time take a small pick or VERY small screwdiver and push in the hole just above the lock cylind toworards the back of were you think the back of the lock is remimber the lock is only 2.5 inches long the pick should push the locking tab on the lock down and just pull out you must hold the locking tab down as you pull out then take the lock to the dealer to get a new one to be keyed they must have the old one to do so and your keys cost between $30 to be rebuit and $70 for a new one get the new one

User Avatar

Wiki User

โˆ™ 2007-04-06 01:25:13
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Add your answer:

Earn +5 pts
Q: Where can you find step by step instructions on how to remove the ignition lock and cylinder on a 2001 Saturn L200?
Write your answer...
Submit

Related Questions

Where can you find step by step instructions on how to remove the ignition cylinder on a 99 Saturn LS2?

I can not turn the barrel to ACC so I can put a pin in the hole that releases the barrel, what do I do?


How does the ignition cylinder come out on your 91 Buick century?

Remove the ignition cylinder retaining ring. Poll the ignition cylinder out. Remove the wiring harness from the back of the ignition cylinder.


How do you remove the ignition key cylinder from a 2003 Kia Optima when a key broke off in the cylinder?

You will need to remove the retaining ring at the top of your 2003 Kia ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness from the back of the ignition cylinder.


How do you remove ignition cylinder from 1975 Chevy pickup?

You will need to remove the retaining ring from the top of your 1975 Chevrolet pickup truck ignition cylinder. Slide the ignition cylinder out and remove the wiring harness. Reverse the process to install the new ignition cylinder.


How do you remove ignition lock cylinder from a 2000 ML430?

Remove the retaining ring from the top of your 2000 Mercedes-Benz ignition lock cylinder. Slide the ignition lock cylinder out and remove the wiring harness.


How do you remove the ignition lock cylinder on a 1997 astro van?

Remove the retaining ring, from the top of your 1997 Ford Astro ignition lock cylinder. Remove the wiring harness from the back of the ignition lock cylinder.


How do you remove the ignition cylinder on a 97 Chevy 1500 WT when it is frozen in the lock position?

Remove the retaining ring from the top of your 1997 Chevrolet 1500 ignition cylinder. Slide the ignition cylinder out and remove the wiring harness.


If you remove all the tumblers from the ignition lock cylinder on a 1994 Saturn SC2 can you still start and drive the car but just not have a lockable ignition and steering wheel?

Should be correct


How do you get ignition cylinder out on 1999 mystique?

You can change the ignition cylinder on your 1999 Mercury Mystique by removing the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness.


How do you replace an ignition lock cylinder on a Chevy S-10?

Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.


How do you remove and replace an ignition lock cylinder on a 1994 Ford Bronco?

Begin by removing the retaining ring at the top of your 1994 Ford ignition lock cylinder. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the ignition lock cylinder. Reverse the process to install your new ignition lock cylinder.


How do you change the key cylinder of the ignition switch in a 1991 acura legend?

Remove the retaining ring at the top of your 1991 Acura Legend ignition switch. The ignition switch cylinder will slide out. Remove the wiring harness from the end of the ignition cylinder. Reverse the process to install your new ignition switch cylinder.


How do you remove the ignition cylinder on a 2000 Lexus RX300?

To remove the ignition cylinder on a 2000 Lexus RX300, first remove the vanity engine cover by unscrewing it. Disconnect the wiring connector by pushing the clip that holds it in place. Finally, remove the bolts that hold the ignition cylinder.


How do you remove the ignition lock cylinder on a 1994 Grand Am?

The 1994 Pontiac Grand Am ignition lock cylinder is held in place by the retaining ring at the top of the cylinder. Remove the retaining ring. Remove the wiring harness from the back of the cylinder.


How do you remove and install a ignition key from a Saturn?

Push the key into the ignition. To remove, push in, then turn towards you to remove the key. I do not know how to remove and replace the whole ignition assembly in case that was your real question.


How do you remove ignition switch cylinder from 2000 Chevy astro van?

You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.


How do you remove and replace the ignition cylinder in a 1978 GMC truck?

I replaced the ignition cylinder (switch) on my '87 which is basically the same truck. It was pretty simple once I used a steering wheel puller to remove the steering wheel . I don't remember exactly how it was done but I followed the instructions in the haynes manual to remove the steering wheel column cover. There were a few lock rings and bolts to remove but it was pretty straightforward. Sorry I can't give any more detailed instructions.


Instructions on how to remove ignition switch on a 1990 Lexus LS400?

Remove the retaining ring from the top of your 1990 Lexus ignition switch. The ignition switch will slide out. Remove the wiring harness.


Can you replace the ignition lock cylinder on a 1994 Pontiac firebird without removing the steering wheel?

You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.


How do you remove the ignition switch from a 1988 Dodge Ram 50?

Ignition switch and lock cylinder removal 1988 Dodge Ram 50.Disconnect the negative battery cable from the battery.Remove the steering column cover to gain access to the ignition switch/lock cylinder.Using wire cutters, remove the cable band.Remove the bolts that hold the ignition switch/lock cylinder to the steering column.Unbolt and remove the key reminder switch and remove the switch lock cylinder from the steering column.


How do you replace an ignition switch in a 99 suburban?

how DO YOU REMOVE AN IGNITION CYLINDER FROM A MALIBU CHEVROLET 2000


How do you change the ignition lock cylinder in a 2001 Chevrolet Tracker?

To change the ignition lock cylinder in a 2001 Chevrolet Tracker, first disarm the air bag system. Then remove the clock spring assembly to be able to remove the old ignition lock cylinder and replace with a new.


How do you replace ignition lock cylinder on a 1996 Mercury Tracer?

Begin by removing the retaining ring at the top of your 1996 Mercury Tracer ignition switch. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the cylinder. Reverse the process to install your new ignition lock cylinder.


How do i replace the ignition lock cylinder on 96 silverado?

Begin by removing the retaining ring at the top of your 1996 Chevrolet Silverado ignition lock cylinder. Slide the ignition lock out and remove the wiring harness. Reverse the process to install your new ignition lock cylinder.


How do you remove ignition switch 1996 cougar xr7?

Insert the key into the ignition. Push the release/switch button at the bottom of the cylinder, and pull the cylinder out.?æ