You can't- You have to buy the whole cruise control buttons ( about 85 bucks from the dealer).
In a Mercury Mountaineer, the cruise control buttons are typically located on the steering wheel or the steering column. Look for a stalk on the right side of the steering wheel or buttons on the wheel itself, which usually include options to set, resume, and adjust the speed. If you're unsure, consult the owner's manual for specific details regarding your model year.
On the dash just to the right of the steering column
On a 2007 Mercury Mountaineer : The rear wiper control is on the inner part of your turn signal lever towards the steering wheel column You will see position 1 , 2 , 0 or off
airl controll
The 2001 Mercury Mountaineer came equipped in the 4.0L V6 and 5.0L V8. The idle air control (IAC) valve is component attached to the throttle body assembly. The actual OEM factory part is Hitachi #ABV0015, and the Ford Motorcraft OE replacement is #CX1851.
what does a insufficient coolant temperature for closed loop fuel control mean and what can i do to fixs it on a mercury mountaineer 1997 engine is a 5.0
The body control module (BCM) on a Mercury Mountaineer is typically located under the dashboard, near the driver's side. Specifically, it can often be found behind the fuse box or near the steering column. Accessing it may require removing some panels or covers for better visibility. Always consult the vehicle's service manual for exact details and safety precautions when working on the electrical systems.
For a 2004 Mercury Mountaineer , 4.0 litre V6 engine : ( .052 to .056 inch ) * confirm with the Vehicle Emission Control Information ( VECI ) decal in the front of your engine compartment
On a 1997 to 2001 Mercury Mountaineer : Check the Vehicle Emissions Control Information ( VECI ) decal located in the front of your engine compartment . It shows what type of spark plug to use and the spark plug gap
I believe the lower balljoints can be changed , but the upper control arm assembly with the balljoint has to be changed
can you tell me the price of a mercury sadle gs /steering colum/tilt wheel/shift on the colum/eng. v 6/cruise control.
For the 1997 to 2001 Mercury Mountaineer : The Powertrain Control Module ( PCM ) is located in the engine compartment . You will see where the wiring harness is bolted to one end of the PCM . It passes through the firewall ( most of the PCM is " hidden " behind the glove compartment area