Try gun shops, gun shows or egunparts.
Use the link below and go to the Browning friction ring diagram that is noted for the 3" magnum A5.
There shouldn't be severe recoil with a Browning A5. Check the friction rings and make sure they are set for the correct loads: Light vs Heavy Loads. If the friction rings are set for light loads, and you are shooting high brass, then it will kick harder than it needs to be.
The weapon was not designed to be fired without the friction rings. You risk damaging it if you fire it without them.
They are not gas rings they are friction rings the A5 is a recoil operated shotgun . If you have all the rings in front of the spring it is set for highbrass loads. for light loads set the small ring next to the receiver with spring over it and the rest of the rings over the front of the spring reassemble the gun make the mag nut and forearm are on tight or you will split the forearm.
They are not gas rings they are friction rings the A5 is a recoil operated shotgun . If you have all the rings in front of the spring it is set for highbrass loads. for light loads set the small ring next to the receiver with spring over it and the rest of the rings over the front of the spring reassemble the gun make the mag nut and forearm are on tight or you will split the forearm.
How do you remove the breech block on a Browning A5 16ga shot gun
No
Browning.
The .410 Browning A5 is an urban legend. Browninig never produced a .410 A5. No
I own a Browning A5, 12ga,Japan made shotgun, ser: 04078. what is it worth?
A5 refers to a shotgun.
You will have to call browning with the sn to find out.