You can get a window regulator for a 1993 Geo Tracker at auto part stores. You can also check with local salvage yards.
To install a window regulator in a Geo Tracker, first, remove the door panel by unscrewing any fasteners and gently prying it off. Disconnect the wiring harness from the window motor, then unbolt the old regulator from the door frame and carefully remove it. Position the new regulator in place, secure it with bolts, reconnect the wiring, and finally reattach the door panel. Test the window for proper operation before completing the installation.
To change the voltage regulator on a 94 Geo Tracker, locate it in the black plastic box on the back of the alternator. Unplug each cable from the regulator, remove it and replace.
93 tracker
Yes.
in the glovebox
If it fit on a 1994, then it will fit on your 1993 with no problem.....
www.mem.com
ONCE THE CABLE COMES OFF ,YOU NEED TO REPLACED THE WHOLE WINDOW REGULATOR.
To repair the cable roll-up window in a 1992 Geo Tracker, first remove the door panel to access the window mechanism. Inspect the cable for any breaks or frays and replace it if necessary; you may need to purchase a replacement window regulator. Reattach the cable to the window and ensure it runs smoothly through the pulleys. Finally, reassemble the door panel and test the window to confirm it operates correctly.
Begin by removing the Geo Tracker door panel. The entire window mechanism will be visible. The window linkage will have adjustment nuts on each end of the linkage.
replace window regulator
In the trunk, under the spare.