the big bang
First have the problem repaired that caused the light to come on in the first place. They will reset the light.
This light is used for 2 different purposes.(1) If the brake fluid is low,this light will come on.(2) light will come on when you engage the parking brake.
Have the problem repaired that caused the light to come on in the first place. Otherwise it will continue to come back on.
Have you repaired the problem that cause the light to come on in the first place? If not the light will just come back on. You reset the light with an OBD2 scan tool.
If the light doesn't come on, rock the bike back and forth, then kick into first, then into neutral. It should always come on. It will not start unless it is in neutral.
What engine light? The check engine light should come on when you first start the vehicle and then go out after a few seconds. If it does not the bulb may be burnt out or has been removed.
It's in Golden Harbor You need to light the lamps in a specific order to get the Map piece. You need to light the first, second, and fourth lamps. Count the lamps and then do this. Light the fourth lamp first, which is right next to the gate. Then you need to light up second lamp, which is on the first building. And then the first lamp which is the first lamp you see when you come there first. If you light them up in this order, the map piece will come out of the gate the fourth lamp is next to.
That requires an engine scanner to do that. If you don't repaire what made the light come on in the first place it will just come back on.
No, it is not illegal to reset the light. It is however illegal to remove the bulb so the light will not come on or to in any other way prevent the light from working as it should. If you do not repair the problem that caused the check engine light to come on in the first place it will just come back on after it is reset.
Easy, fix the problem that caused the light to come on in the first place.
Disconnect the battery for 20 minutes. This should reset the light. Of course if you do not repair the problem that caused the light to come on in the first place, it will just come back on.
Lots of problems could cause the light to come on. First off, check your fluid levels; second, take it to a mechanic.