There should be plugs where you unplug your old o2 sensor plug at. If you havent done that then just follow the wire from the plug.
in front of the cat converter
USUALLY 2 ONE IS A SENSOR (IN FRONT OF CAT CONVERTER) THE OTHER IS A MONITER (AFTER CAT CONVERTER) THIS SENSOR monitersCATALYTIC CONVERTER EFFIcency
There are four. One above the cat/converter and one below each cat/converter. Follow the wires.
there is one after the cat converter and there is an intake sensor in front of the motor.
Yes, in the front edge.
You have (4) O2 sensors of the (97 to 99) Two are in front of the CAT. (Catalytic Converter). and the other two are behind the CAT. (Catalytic Converter).
Bank 1 sensor 1 is screwed into the front of the catalytic converter. Bank 1 sensor 2 is after the cat. There isn't a bank 2 on that year Dodge Ram.Bank 1 sensor 1 is screwed into the front of the catalytic converter. Bank 1 sensor 2 is after the cat. There isn't a bank 2 on that year Dodge Ram.
Just in front of the Cat converter, drivers side.
The front sensor is reading wether your air/fuel mixture is correct and computer makes adjustments according to a rich or lean reading from o2 sensor. The rear sensor is reading what comes out from the cat/converter to see if converter is doing is job in removing pollutants.
it should be located on the front exaust pipe before the cat converter.
it means a oxygen sensor on bank 1 is not working. you need to find bank 1 and figure out if it is sensor 1 or 2. sensor 1 is in front of the cat. converter. sensor 2 is behind the converter
Right in front of the cat converter. Left or right side