0
The USB connector is typically located on the back of your printer. If you can not locate it there, you should refer to your printer documentation. If you cannot find the documentation for it, you can usually find it by searching the printer manufacturer's web site.
Wiki User
∙ 15y ago
Wiki User
∙ 12y agoIf it is a pictbridge compatible printer; it will have a usb port- usually on the front of the printer, sometimes near the printer status indicator lights.
Add your answer:
Earn +20 pts
Which components are used to connect a computer to a printer?
A cable or wifi. If a cable is used, it may be classed as a serial, parallel, or USB connecting cable - depending on the type of printer.
Will a printer rated to use USB 3.0 work when you connect the printer's USB cable into a USB 2.0 port on your computer?
Yes, it will. USB 2.0 has forward and backward compatibility.
Will a printer rated to use a USB 3.0 work when you connect the printer's USB cable into a USB 2.0 port on your computer?
Yes, it will. USB 2.0 has forward and backward compatibility.
How do you connect to printer on the galaxy s3?
plug an USB OTG cable adapter and connect directly to your printer, sadly it said that work only with a Samsung printer.
How do you connect printer to the computer?
using a usb cable which is a connection between the computer and the printer only or wirelessly which means everyone on the network can use the printer but only if computer and printer is wireless
Why do you need a usb cable on a printer?
A USB printer cable is used to allow a computer to send commands to the printer. The computer must have the appropriate "Driver" software, which will allow it to send the correct commands over the cable. For very small printers, the USB cord is able to provide about five volts of power.
How do you connect Epson LQ300 plus to computer without parallel port?
first of all plug in usb to parallel printer cable into the computer windows automatically installed found new hardware after that connect the cable into your printer
What lead do i need to connect a printer to a laptop?
All you need to connect it to your laptop is a USB cable to plug into the printer so it can connect to the laptop. If your printer came with a CD, then install it using that. Most of the time you need a Type A to Type B USB cable to connect printer to a PC or Laptop. Both side connector are different. You can get these cheap (less than $3-4) on internet or in discount electronics stores. - Neeraj Sharma
How can you connect a printer to a computer?
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
What is DB-25m cable?
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
Which network cable should you use to connect PC to printer?
Whether your printer uses a serial port, or parallel port, or USB port, or wifi, decides what type of cable you need. Name and model of printer? Have you looked on the maker's website or user guide for instructions?
Can you connect your iphone to your usb printer?
no
