It's the interior trim panel , just in front of the drivers door
If you mean the inertia reset switch, it's in the driver side kick panel.
Mounted to the firewall on the driver's side.
According to the 1997 Mercury Villager Owner Guide : The jack is behind a removable plastic panel , in the cargo area , on the passenger side ( there is also the tool kit with the lug wrench )
The programming button for the 1997 Mercury Villager is typically located on the driver's side, near the driver's door or under the dashboard. It may also be found on the keyless entry module, which can be accessed by removing a panel near the steering column or the driver's side footwell. If you have the owner’s manual, it can provide specific details on its exact location.
They are mostly identical, yes.
What is the fuel tank capacity of a 1997 Mercury Villager van?
If it has a rear orifice it's in the rear unit under the roof panel.
A 1997 Villager has a red button behind the driver side kick panel next to parking brake pedal. I found it by going to Ford.com/parts down loaded the owners manual. If you don't have the owners manual thy this.
According to the 1997 Mercury Villager Owner Guide : ( 20.0 US. gallons )
what is the spark plugs firing order for a mercury villager 1997
In the 1997 Mercury Villager, the Transmission fluid dipstick is located on the driver's side of the engine just in front of and below the master cylinder/brake fluid check. The 97 Villager has a bulbous knob on top with no indication that it is the Transmission fluid.
yes