The vehicle speed sensor is located on the top side, facing towards the windshield, of the transmission. It is directly under the air intake hose that leads from the air filter to the intake manifold. It can be very difficult to reach and requires a T30 Torx bit.
The vehicle speed sensor is at the top rear corner of the transmission housing.
The vehicle speed sensor is a permanent magnet generator mounted on the transaxle case
The vehicle speed sensor is located on the top center of the rear axle.
location
The speed sensor on a 2000 Mercury Village is found on the transmission of the vehicle. The sensor will be placed on top of the unit to read the rotations of the transaxle.
If the speedometer/odometer is working, chances are the VSS (Vehicle Speed Sensor) is good.
The vehicle speed sensor will be located above the transmission output shaft.
The output speed sensor is located on the back end of the transmission. The vehicle speed signal comes from the abs sensor on the top of the rear axle.
The vehicle speed signal comes from the transmission computer via the output speed sensor. The output speed sensor is on the front, driver side of the transmission case.
The P0500 code indicates a malfunction in the vehicle speed sensor circuit, while the P0720 code refers to a problem with the output speed sensor. On a 2000 Mercedes-Benz ML320, the vehicle speed sensor is typically located on the transmission, and the output speed sensor is found on the transmission housing as well. For parts, the vehicle speed sensor is often part number A0005402017, and the output speed sensor is typically A0005401617, though it's best to verify with a parts supplier for your specific vehicle.
Trouble code p1633 means: Vehicle Speed Signal
The Vehicle Speed Sensor will be on top of the transmission, at the transmission output. Wheel Speed Sensors will be located at each wheel.... the latter are for ABS.