in a nice manner go to your local dealer and talk to the garage boys, if you ask them nicely they will take your stereo out. and its free happy days
That depends on the amount of pins the old and new stereo have - the "pins" are where you plug your wiring into in the back of the stereo and not all stereos have the same number of pins. (But wiring adapters with the suitable number of pins can be bought)
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out. Remove the wiring harness and the antenna cable.
Remove the retaining cover from your stereo. Remove the stereo retaining bolts. Slide the stereo out and remove the wiring harness. Reverse the process to install your new stereo.
Remove the decorative stereo cover. Remove the stereo retaining screws. Pull the stereo out and remove the wiring harness and the antenna cable.
you will see two holes in each side of the radio, insert standard radio pins in here and the radio will pull out
you will see 2 holes in each side of the radio, insert standard radio pins into these and the radio will pull out
Remove the decorative cover from your 2006 Chevy Express stereo. Remove the stereo retaining screws. The stereo will slide out. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative stereo retaining cover. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness and the antenna cable.
Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
Its a while since i did one, but im sure its either just radio pins that you pop it out with or there are sometiny torx screws you have to remove first. either way there wioll be some small square holes around the front of the radio, that's where you put the pins in or take the torx out.
remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo remove the plastic panel around the stereo by using a flat screwdriver to pop it out in all corners then remove screws then remove stereo