0
What else can I help you with?
Where do you put the green wire to the coil when installing a tach in your 1997 Chevy Cavalier?
i like to know what wire it is if any one knows email it to me tduckworth422@yahoo.com thanks
How do you change the spark plug wires on a 1997 cavalier?
Buy the spark plug wires that your model calls for. Lay them on the ground by the car. Take one wire off, match it up with the same size wire, and put that wire to the same two points. Do one wire at a time like this, and you can't possibly mix anything up.
Can you put a 2000 cavalier 2.2 L transmission into a 1997 2.4 L?
NO!
Where do you ground amp wire in mercury sable?
you can ground it right to the frame. just find a bare spot and put a screw with the ground wire
Does the ground wire have to be put in PVC on the side of the house?
no, it has to be in the ABC
Is the engine in the 1997 Chevy Cavalier the same as a 2003 Chevy Cavalier and can you put a 2003 engine in a 1997 Chevy Cavalier?
Well yes and no. Both have a 2.2 four cylinder if I'm not mistaken, but I don't think the earlier Cavalier's have the EcoTec motor. And you should be able to get the engine from the '03 into the '97 with no problem.
How do you bypass the parking brake wire on a clarion vz709?
gound it put the wire in the ground of the car sterio
Do you put electrical tape around a spliced ground wire?
No, it is not recommended to put electrical tape around a spliced ground wire. The ground wire should be securely connected using a wire nut or another appropriate connector as specified in electrical codes to ensure a reliable connection and safety.
On your 1988 cougar when you put on the brakes tail lights go out?
This could because by a bad ground wire. Check the ground wire to make sure it is connected properly and not corroded.
Your 1997 Chevy cavalier wont goe in reverse and the headlights come on when you put it in reverse you have no idea why?
Could be a linkage problem..
Will your 1994 1500 Chevrolet 4x4 start even though the ground wire from the frame to the firewall is not there?
Try and see. Why not just put the groind wire back on?Try and see. Why not just put the groind wire back on?
When wiring a range the outlet has a neutral ground and 2 hots you have three wires do you put the bare wire in the neutral or ground on the outlet?
the bare copper is always a ground
