Try and see. Why not just put the groind wire back on?
Try and see. Why not just put the groind wire back on?
Try and see. Why not just put the groind wire back on?
if its factory, its located inline next to the frame under the drivers side door where the frame meets the firewall.
There is no VIN #. There is however a build plate. It may be located in several locations. On the firewall, glove box, frame, etc
Connect a ground wire to what? If you mean from the engine block to the firewall or frame - it ia always recommended that a grounding strap be connected between the two.
It has a full perimeter frame.
have a 92 sunrunner , passenger door main frame the two nut came though it, how can i weld them back in
Chevrolet
The ground wire on a typical Chevrolet truck should be located at the rear of the vehicle. The wire should be white in color, and should be attached to the frame by a screw. You may need to remove the tail light housing and trace the wire from there as the location varies on different models and years.
the firewall is the metal frame of the truck that separates the engine compartment from the dash
It is underneath on the frame just forward of the gas tank. ANOTHER ANSWER: It is my understanding that the Chevrolet and GMC trucks ALL had the fuel pumps inside the tank. The fuel filters are inside the frame, forward of the tank and the fuel pump fuse is under the hood, on the passenger side of the firewall just above the AC receiver/dryer can. I stand corrected as I had fuel filters on my mind. I apologize for the error.
None
frame rail
It should be near the passenger side where the below the black panel It should be near the passenger side where the below the black panel