Want this question answered?
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
Power equals voltage times current in amps. The value of amps used is needed to do the math.
Wattage is the total output of sound volume. Amps refer to the amount of current needed to provide proper power (electricity) to the amplifiers that reproduce the sound.
Watts = Amps x Volts x Power Factor For a motor the Power Factor is less than 1 and might typically be about .75. For a resistive load like a toaster PF = 1. If you know the Voltage and PF and know the wattage you can calculate amps. Amps = Watts / (Volts x PF)
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
The forumla for power is: Power (watts) = Volts x Amps Therefore: Amps = Power/Volts So the answer to your question depends on the voltage in use. @230v: 0.14 Amps @24v: 1.33 Amps @12v: 2.66 Amps
Power equals voltage times current in amps. The value of amps used is needed to do the math.
To find the power in watts, multiply the current (5.0 amps) by the voltage (which is needed to provide the full power calculation). Without voltage information, we can't determine the power in watts solely from current (amps).
No No No. If your supply can give .2A, and you need 2 Amps, your supply's not going to cut it.
To answer this question the pump voltage is needed.
Wattage is the total output of sound volume. Amps refer to the amount of current needed to provide proper power (electricity) to the amplifiers that reproduce the sound.
To answer this question a voltage is needed. Amps = Watts/Volts.
A battery with 650 cold cranking amps is called for.
Watts = Amps x Volts x Power Factor For a motor the Power Factor is less than 1 and might typically be about .75. For a resistive load like a toaster PF = 1. If you know the Voltage and PF and know the wattage you can calculate amps. Amps = Watts / (Volts x PF)
Homes do not normally have a 450 v supply and domestic equipment can not be bought for 450 v. For any voltage the current in amps equals the power in watts divided by the votage (and an extra allowance for power factor).
To convert amps into watts a voltage is needed. Watts = Amps x Volts.
A rough guide is to divide kVA by the supply voltage then multiply by 1000 to get current in Amps. E.g. 20kVA divided by 120V is 0.167; times 1000 is 167 Amps. But kVA is not the same as kW, so more information is needed before equipment is used.