0
Where does the cable in a 1991 3 quarter ton pick up rear brake assembly connect to and what is its name?
Wiki User
∙ 16y ago
Parking brake cable? Connect to the cable from the opposite side and the emergency brake cable from the control inside the cab. Self-adjusting cable?
Connects to the "star wheel" and the brake shoe return spring inside the drum
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you connect the front parking break cable to the parking break assembly on a 1993 ford f-150 4X4?
there is no front parking brake on a ford 4x4. the park brake is in the rear wheel brake assembly only ^ not what he asked The front cable does go to the back and on f150 93 and later theres no adjuster before the equalizer I think you have to remove the Pedal to get some slack im currently looking for the answer too
What are the two fluid lines that run to the front brake assembly on my Kia sportage?
brake fluid line and antilock senor cable( the second one is really a cable that looks like a line).
How do you hook the e brake cable to the shoe?
all you do is you dismantle the whole thing and then put it back together, but disconnect the e-brake cable and connect it to the front brakes and automatically it will apply to the back wheels when pressing the foot brake. hope that helped
What is a straddle cable for a bmx bike?
It's just a short length of cable, maybe 5" or so, that's used to connect the arms of the brake together.
Can you connect the parking brake cable to the brake pedal on a 98 ford f150?
And why in the world would you want to do that, as the rear brakes which are operated by the parking brake are already activated by the brake pedal. Do not even think of doing this.
How do you install brake pads on a 1992 Aerostar?
# Release the parking brake # Remove the cowl trim panel from the left side of the drivers compartment for access to the parking brake pedal # Pull back on the parking brake cable toward the control assembly (parking brake) and insert a 5/32 inch drill bit into the control actuator to lock the assembly into position # Its actually easier to pull the parking brake cable from under the vehicle but you will need an assistant to help you do this way. # Loosen the rear wheel lug nuts and raise and support the truck # Remove the brake calipers and the brake discs # Detach the parking brake cable from the actuator arm # Clean the parking brake assembly with brake cleaner # Remove the brake shoe retracting spring # Remove the adjusting screw spring and remove the adjusting screw # Remove the hold down springs from the shoes # Remove the parking brake shoes from the actuator
How do you adjust parking brake on 1997 Mercury Mountaineer?
You need to adjust the parking brake shoes by taking the rubber plug off the back and adjusting them like regular brake shoes. On my 1997 Mercury Mountaineer I adjusted the brake shoes, but it didn't work. The parking brake wouldn't hold, so I replaced the drums, and shoes and it still didn't hold. Next I replaced all the brake cables, since there didn't seem to be a cable adjustment. The problem ended up being the parking brake assembly. The coil spring inside somehow came loose and uncoiled about one revolution. This spring "Is the parking brake cable adjustment", it provides pre-tension to the brake cable, so when you push on the parking brake pedal it starts applying the parking brake after about 2-3 clicks. I when to "Pick a Part" junkyard and bought one for about $13.00 and that fixed the problem. FYI: Just because you feel tension and hear clicking when pushing the parking brake down and the pedal comes back up when released, does not mean the pedal assembly is working. Check the cable tension when release and check the end of the coil spring to see if it is hooked over a metal tab (my broken unit, spring was up against the end of the brake cable and wasn't providing pre-tension) If you replace the rear brake shoes and the parking brake doesn't hold, don't just also replace all the brake cables like I did, because it still didn't work. If you can push the brake pedal all-the-way to the floor and it still won't hold, do the following: - Release the parking brake and look under the car on the drivers side and inspect the parking brake cable and cable tension. - The cable should not be loose when released, and the cable should be centered in the holes in the frame. - If the cable is loose when released, the problem is the "Brake Pedal Assembly" under the dash on left side.
How do you adjust the front brake cable on a 2000 road king?
There is no brake cable on your bike
Can you release the parking brake on a 2001 Chevy silverado 1500 hd if the cable has broken?
on the side of the brake assembly is a lever with a "u" at the bottom pull or pry it rearward-this will release the pedal (BE CAREFUL IT WILL RELEASE HARD)
How do you fix 1988 S10 emergency brake cable?
Really ain't no fixing a brake cable. Replace it with a new cable.
Disconnecting emergency brake cable?
The emergency brake cable is held in place with swivel nuts on each end of the cable. Turn the swivel nuts to the left. The emergency brake cable will come off.
What is the difference between a throttle cable and a brake cable?
The throttle cable goes from the 'gas' pedal to the carburetor or throttle body to control the speed of the engine. On cars the brake cable goes to the emergency brake, on some motorcycles the brake cable goes to the brakes. (The main brakes for cars and some motorcycles are hydraulically operated, not by a cable.)
